ISMOD NANO User Manual page 5

Temperature Adjustment Mode (TA):
To start TA mode, press the button 5 times quickly.
Press the button quickly 5 times to change the temperature heating
mode, the LED indicator light will flash green, white and purple
alternately.
Wait for the light indicator to perform a self-test, i.e., to stop shining.
Press the button to change the heating mode, one click shows the
current heating mode.
Press and hold the power button to confirm the heating mode or wait
10 seconds to exit the (TA) mode.
4. REMOVAL OF NON-COMBUSTIBLE TOBACCO CARTRIDGE
(1) Press the push button up and the
non-combustible tobacco cartridge
will come out of the cartridge
holder.
The LED light colour indicates the following:
Green LED indicator: Low temperature
White LED indicator: Middle temperature
Purple LED indicator: High temperature
(2) Remove the
non-combustible tobacco
cartridge and twist the
protective cap