ISMOD NANO User Manual page 4

5. OPERATING INSTRUCTIONS
1. PREPARATION
Rotate the dust proof cover
2. INSERTING NON COMBUSTIBLE TOBACCO
Place the cartridge of
non-combustible tobacco upright in
the chamber, placing the filter outside.
3. HEATING
Press and hold the button for 1.5 seconds until the LED flashes white
and the device makes the first vibration.
The device starts with pre-heating, the duration of pre-heating is 15 seconds.
When the LED indicator light turns solid blue and the second vibration appears,
you can start enjoying 4 minutes and 45 seconds of consumption.
When the consumption time reaches the last 30 seconds or reaches the 13th
pu , a third vibration will occur, and the LED indicator light will begin to flash
white, indicating that the heating period is almost finished.
When the entire consumption time is over or after the 15th pu s, a fourth
vibration will appear, and the LED indicator light will turn o , indicating that the
entire heating process is complete.
The LED indicator shows a
constant heating mode