Subscribe to Our Youtube Channel
Related Manuals for Excel 12240
Summary of Contents for Excel 12240
- Page 1 Original Instructions CORDLESS MULTIFUNCTION TOOL 18V 12240/MT-L0218 INSTRUCTION MANUAL...
-
Page 2: Description Of The Symbols
Original Instructions DESCRIPTION OF THE SYMBOLS Read instructions carefully before any use Complies with relevant European regulations The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. -
Page 3: General Power Tool Safety Warnings
Original Instructions GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings, instruction, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE. The term "power tool"... - Page 4 Original Instructions serious personal injury. b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries. c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool.
- Page 5 Original Instructions have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
-
Page 6: Special Safety Instructions
Original Instructions b) Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers. SPECIAL SAFETY INSTRUCTIONS 1. WARNING. Contact with or inhalation of harmful / toxic dusts arising from sanding lead-based painted surfaces, woods and metals can endanger the health of operator and bystanders. - Page 7 Original Instructions 17. Exercise extreme caution when handling the scraper accessory. The accessory is very sharp; danger of injury. 18. Keep your hands away from the cutting area. Do not reach under the material being cut. The tool must be used only for its prescribed purpose. Any use other than those mentioned in this Manual will be considered a case of misuse.
- Page 8 Original Instructions Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack breaks open or cracks, immediately discontinue its use and do not recharge it. Do not store or carry a spare battery pack in a pocket or toolbox or any other place where it may come into contact with metal objects.
- Page 9 Original Instructions Before using the charger, read all the instructions and cautionary markings on the charger and battery pack as well as the instructions on the battery pack. Only charge your battery pack indoors as the charger is designed for indoor use only.
- Page 10 Original Instructions Never attempt to connect two chargers together. Never insert any objects into the charger’s air vents. Electric shock or damage to the battery charger may result. Disconnect the charger from the outlet before attempting any cleaning. This will reduce the risk of electric shock. Removing the battery pack will not reduce this risk.
- Page 11 Original Instructions LED light Blade lock/Unlock level On/off switch trigger Speed control Side handle Locking collar Batter pack (excluded) Sanding base Sanding paper Scraper Plunge cut blade TECHNICAL SPECIFICATIONS Product description 18V Li-ion multifunction tool Rated voltage of battery Speed, n 5,000-20,000/min Sound pressure level L 75dB(A)
- Page 12 Original Instructions NOISE/VIBRATION INFORMATION Measured sound values determined according to EN 62841. Wear hearing protection! Vibration total values (triax vector sum) determined according to EN 62841: The vibration emission level given in this information sheet has been measured in accordance with a standardized test given in EN 62841 and may be used to compare one tool with another.
- Page 13 Original Instructions a. Charging the battery This lithium-ion battery pack is shipped partially charged. Before using it the first time, fully charge the battery pack. A fully discharged battery pack with a temperature between 5℃ and 35℃ will charge in about 30-140MIN(See section”Specifications”).
- Page 14 Original Instructions OPERATION ATTACHING THE HANDLE Screw the handle into the thread. Make sure that you screw the handle onto the left side of the multi-tool if you are right-handed and onto the right side if you are left-handed. FUNCTIONS Attaching the application tool CAUTION: For all work or when changing application tools, disconnect the battery pack from power tool and always wear protective gloves.
- Page 15 Original Instructions NOTE: Attach the application tool at the desired orientation for the task at hand. The shaft is configured so that the application tool can be attached every 30° around the shaft, from 0°to 330° Mounting/changing the sand paper 1.
- Page 16 Original Instructions Switch on and off To turn the tool ON, push the on/off switch forward. To turn it OFF, push the switch backward. LED work-light The LED work-light will activate when the trigger is depressed. It will automatically shut off following a short period of time once the trigger is released.
- Page 17 Original Instructions Sanding The removal rate and the sanding pattern are determined by the choice of sanding sheet and the work surface. Apply uniform sanding pressure to extend the life of the sanding sheets. • Intensifying the sanding pressure does not lead to an increase of the sanding capacity, but instead it increases wear on the machine and the sanding sheet.
- Page 18 Original Instructions Picture Name Application SAWING Bi-Metal Wood,plastic, Metal/Wood fiberglass,nails, End Cut Blade non-ferrous metals, thin sheet metal, hardened fillers SANDING Sanding base Wood,plastic, hardened fillers SCRAPING Rigid Scraper Old paint,hardened Blade adhesives,caulk,carpet SERVICE & MAINTENANCE Always remove the battery from the tool before performing any adjustment or maintenance operation.
- Page 19 Original Instructions Disposal Electronic devices are recyclable waste and must not be disposed of in the household waste. At the end of its service life, dispose of the product according to the relevant statutory regulations. Remove any rechargeable battery, if necessary, and dispose of it separately from the product.
- Page 20 Original Instructions Exceltools.co.uk Sales@exceltools.co.uk...
Need help?
Do you have a question about the 12240 and is the answer not in the manual?
Questions and answers