Pair The Earpieces With Your - Philips JT60 User Manual

Pair the earpieces with
your Bluetooth device at
the st time
Make sure that the earpieces is fully
charged.
Open the top cover and take out
both earpieces from charging box.
The LED on both earpieces
ash in whtie & blue alternately.
The earpieces is now in pairing
mode and is ready to pair with a
Bluetooth device (e.g. a mobile
phone).
Turn on the Bluetooth function of
your Bluetooth device.

Pair the earpieces with your

Bluetooth device. Refer to the user
manual of your Bluetooth device.
Note
 After powering on, if the earpieces cannot nd
any previously connected Bluetooth device, it
will automatically switch to pairing mode.
The following example shows you
how to pair the earpieces with
your Bluetooth device.
Turn on the Bluetooth function
of your Bluetooth device, select
Philips JT60.
Enter the earpieces password
"0000" (4 zeros) if prompted.
For those Bluetooth devices
featuring Bluetooth 3.0 or higher,
no need to enter a password.
Philips JT60
Single earpiece pairing
(Mono mode)
Take either right or Left earpiece out
from charging box for Mono use. The
earpiece will power on automatically.
There will be a voice "Power on" from
earpiece.
Note
 Take the second Earpiece from the charging
box and they will pair each other automatically.