1. Manuals
  2. Brands
  3. ALLSPEEDS Manuals
  4. Jacks
  5. Tangye 21219
  6. Original instructions manual

ALLSPEEDS Tangye 21219 Original Instructions Manual

Hydramite jacks
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Original Instructions
for
Hydramite Jacks
Revision 1 – Issue 2
(MOD 21219)
Allspeeds Ltd.
Royal Works, Atlas Street
Clayton Le Moors, Lancashire, UK.
BB5 5LW
01254 615100

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Tangye 21219 and is the answer not in the manual?

Questions and answers

Related Manuals for ALLSPEEDS Tangye 21219

Summary of Contents for ALLSPEEDS Tangye 21219

  • Page 1 Original Instructions Hydramite Jacks Revision 1 – Issue 2 (MOD 21219) Allspeeds Ltd. Royal Works, Atlas Street Clayton Le Moors, Lancashire, UK. BB5 5LW 01254 615100...

  • Page 2: Table Of Contents

    Raising the Jack ............12 Lowering the Jack ............16 After Use ..............17 Maintenance ............18 Parts List ..............19 Seal Kit Components............ 19 Decommissioning ........... 20 Allspeeds Document - Tangye Hydramite Manual Page 2 of 20 Rev 1. Issue 2. Date: 01/07/2021...

  • Page 3: Scope

    It is expected that the product is used by competent technical personnel who have been properly trained to use hydraulic lifting equipment. Allspeeds Document - Tangye Hydramite Manual Page 3 of 20 Rev 1. Issue 2. Date: 01/07/2021...

  • Page 4: Technical Data

    By its design, the jack operates slowly under manual effort. There is no noticeable noise or vibration. The noise level does not exceed 70 dB(A). Allspeeds Document - Tangye Hydramite Manual Page 4 of 20 Rev 1. Issue 2. Date: 01/07/2021...

  • Page 5: Declaration Of Conformity

    3 Declaration of Conformity...

  • Page 6: General Safety Rules

    It is also important that they are retained with the equipment if it is sold or transferred to another user. Allspeeds LTD will not be held responsible for any damage to the equipment or personal injury resulting from unsafe use of the product, lack of maintenance or incorrect operation.

  • Page 7: Warnings

    Tipping Hazard Lowering Hazard Ensure jack is on level, smooth surface to Do not place anything under jack while prevent tipping. loaded unless mechanically locked. Allspeeds Document - Tangye Hydramite Manual Page 7 of 20 Rev 1. Issue 2. Date: 01/07/2021...

  • Page 8: Operating Instructions

    Ensure the work area is clear and free from obstructions. • Ensure the operator can watch the lifting device and the load during all movements. Allspeeds Document - Tangye Hydramite Manual Page 8 of 20 Rev 1. Issue 2. Date: 01/07/2021...

  • Page 9: Check Oil Level

    Use high quality hydraulic oil such as Shell Tellus ISO 32 or equivalent. Figure 1 – Checking Oil Level After checking the oil level, replace the filler plug. Allspeeds Document - Tangye Hydramite Manual Page 9 of 20 Rev 1. Issue 2. Date: 01/07/2021...

  • Page 10: Positioning The Jack

    Always ensure that loads are applied centrally to the ram. Figure 2 - Loading the Jack Allspeeds Document - Tangye Hydramite Manual Page 10 of 20 Rev 1. Issue 2. Date: 01/07/2021...
  • Page 11 If the jack is to be placed some distance under the load, use the operating lever in the operating lever socket to position the jack. Figure 3 – Manoeuvring the Jack Allspeeds Document - Tangye Hydramite Manual Page 11 of 20 Rev 1. Issue 2. Date: 01/07/2021...

  • Page 12: Raising The Jack

    Do Not extend the ram by any means other than by pumping the jack. Do Not attempt to exceed the rated load of the jack. Allspeeds Document - Tangye Hydramite Manual Page 12 of 20 Rev 1. Issue 2. Date: 01/07/2021...
  • Page 13 When the full extension has been achieved a positive stop is engaged; further pumping will only circulate oil within the jack. This circulation will be apparent to the operator because Allspeeds Document - Tangye Hydramite Manual Page 13 of 20 Rev 1. Issue 2. Date: 01/07/2021...
  • Page 14 Table 1 - Maximum Effort on Operating Lever Where the generated effort to raise the loaded jack exceeds 400N, the effort shall be lowered by additional persons. Allspeeds Document - Tangye Hydramite Manual Page 14 of 20 Rev 1. Issue 2. Date: 01/07/2021...
  • Page 15 When using multiple units to lift a load, all jacks must operated at the same time, so that the load is lifted evenly. Figure 6 – Jacks Lifting Evenly Allspeeds Document - Tangye Hydramite Manual Page 15 of 20 Rev 1. Issue 2. Date: 01/07/2021...

  • Page 16: Lowering The Jack

    (approx. 5°) at first. Figure 7 - Closing the Release Valve Allspeeds Document - Tangye Hydramite Manual Page 16 of 20 Rev 1. Issue 2. Date: 01/07/2021...

  • Page 17: After Use

    (see Figure 4). Always clean the ram and retract after use. Always remove the jack operating handle when not in use. Allspeeds Document - Tangye Hydramite Manual Page 17 of 20 Rev 1. Issue 2. Date: 01/07/2021...

  • Page 18: Maintenance

    Refer to authorised service centre for testing and service. IMPORTANT – This jack should only be serviced by qualified personnel. If in any doubt please contact Allspeeds Ltd or a distributor. IMPORTANT - Replacement parts must always be sourced from Allspeeds Ltd.

  • Page 19: Parts List

    Each jack has a seal kit available and the kit required can be determined from Table 2. Jack Model Seal Kit 6.5 Tonne 995052 10 Tonne 995053 15 Tonne 995054 Table 2 – Seal Kits Allspeeds Document - Tangye Hydramite Manual Page 19 of 20 Rev 1. Issue 2. Date: 01/07/2021...

  • Page 20: Decommissioning

    Remaining components should be disposed of in accordance with local current regulations. Hydraulic fluid should be drained into a suitable container and disposed of in accordance with current local regulations. Allspeeds Document - Tangye Hydramite Manual Page 20 of 20 Rev 1. Issue 2. Date: 01/07/2021...

Table of Contents