Table of Contents
Advertisement
WARNING DISPLAY
Content
Battery is almost dead
Inserting the battery
Battery
Lights up
Battery is dead
Inserting the battery
SmartMedia is not initialized
Delete all images (initialization)
Corruption or deletion of SmartMedia data
[P| Lights up | SmartMedia write-protectis engaged | Concerning SmariMeda
|
Lights up
No remaining images in SmartMedia
Deleting the last image or
Delete all images (initialization)
* If the shutter, mode, display or erase button is pressed while a warning display other than the battery mark is
shown, the respective functions will not work.
TROUBLESHOOTING
The power can't be
No batteries inserted.
Install the battery correctly or
Battery is dead.
replace it.
The PC card is not closed.
Close the PC card correctly.
Because no operation was performed,
Switch the unit on again.
off by itself
activating auto power off.
No images can be
SmartMedia is not loaded.
Load the SmartMedia card correctly.
captured
SmartMedia isn't initialized.
Initialize the Smartmedia card.
The useful life of the SmartMedia card
Load a new SmartMedia card correctly.
has come to an end.
SmartMedia data is corrupted or deleted.
SmartMedia write-protect is engaged.
The number of shots remaining is 0.
The shutter button isn't pressed to the
second stage.
Not enough light.
Load a new SmartMedia card correctly.
Remove the write-protection seal.
Delete the last image or deleting all images.
Press the shutter button to the
second stage.
Illuminate the subject to be captured.
The image is dark
19
Advertisement
Table of Contents
