Do you have a question about the HD4000 and is the answer not in the manual?
Questions and answers
Chuck Beleny
March 24, 2025
How do you know how many gallons of water to put in since the HD4000 is not marked
1 comments:
Mr. Anderson
March 24, 2025
The PetraTools HD4000 has a 4-gallon tank. If the tank is not marked, you can determine the correct number of gallons by measuring and adding water in known increments. For example, you can use a 1-gallon container to fill the tank, counting each addition until you reach the desired amount.
This answer is automatically generated
Al, Torres
March 19, 2025
On/off switch doesn't turn on ?
1 comments:
Mr. Anderson
March 19, 2025
To fix the on/off switch issue for the PetraTools HD4000, follow these steps:
1. Check the Switches – Ensure the red rocker switch and silver pressure knob are turned off when not in use. Leaving them on, especially while charging, can drain the battery. The silver pressure knob should click audibly when turned counterclockwise all the way.
2. Check the Indicator Lights – The red light indicates the unit is on, while the green light shows that the battery is charged. Verify that the lights function correctly.
3. Check the Fuse – Remove the fuse from the control panel and inspect it. Ensure there is no burning inside and that the filament is intact. Replace it with the included spare if needed.
4. Check the Battery Charge – Plug the charger into the unit. If charging correctly, the charger light will turn red.
Following these steps should help resolve the on/off switch issue.
This answer is automatically generated
Jack Oyer
June 15, 2025
How long does it take to fully charge the hd4000?
Harold Hill
June 7, 2025
Is there a way to reduce the pump pressure to close to 20 psi. In spraying Roundup, I prefer to minimize drift by using lower pressure. I have used a 22.5 psi pressure control valve at the end of the wand, but the pump keeps turning on and shutting off, which has got to be hard on pump and pump switch.
Page 1
PETRATOOLS PETRATOOLS HD4000 HD4000 ® ® BATTERY POWERED BATTERY POWERED BACKPACK SPRAYER BACKPACK SPRAYER Pr o d u ct M a n u a l USER GUIDE Need Help? Scan or visit Register for your petratools.com/support for FAQ’s and videos on extended warranty using this product.
Page 2
If you have any questions or concerns or missing parts DO NOT RETURN UNIT TO STORE / ONLINE RETAILER: PLEASE CALL OUR SUPPORT HOTLINE AT 1-800-613-6889 Visit www.petratools.com Email our support: support@petratools.com Common maintenance questions: www.petratools.com/start...
BATTERY POWERED BACKPACK SPRAYER BACKPACK SPRAYER P r o d u c t M a n u a l What’s in the box? How to use the HD4000 sprayer Attaching the wand clip Product Specifications Joining the GOLD CLUB Application...
Thread the bottom of the valve handle onto the hose. Use plumbers’ tape to secure a leak-free connection. STEP 2 Charge your HD4000 before using it. We charge our sprayers before we ship them. However, you may receive a sprayer with less than a full battery. STEP 3 Connect the hose to the sprayer.
Page 6
STEP 4 Thread the wand onto the top of the valve handle nice and tight. STEP 5 Select the nozzle of your choice and attach it on the wand. There are six nozzles you can choose from depending on your spraying task. STEP 6 Prime your sprayer pump before the first use.
Page 7
STEP 8 Dial in the pressure. STEP 9 Squeeze the valve handle and spray continuously. STEP 10 Turn off the pressure adjustment knob when you’re finished. Empty any remaining solution from the tank and rinse it thoroughly with clean water.
Page 8
ATTACHING THE WAND CLIP – HD4000 STEP 1 Before beginning installation, please ensure you have all the parts you’ll need: 2 orange wand brackets (top & bottom), 4 Phillips machine screws, 4 hex nuts. STEP 2 The orange wand clip bracket goes on the top, while the orange wand tray bracket goes on the bottom.
8 hours Nozzle Usage time 3-4 hours Straps On/Off switch/Pressure buttton Please visit the page Questions/Issues Toll free: 1-800-613-6889 petratools.com/support with your product? Contact us: support@petratools.com to get the fastest resolution We’re here to help! Website: www.petratools.com to your problem.
Page 10
YOUR PURCHASE QUALIFIES YOU FOR Why join the Gold Club? FREE PetraTools 90 Day Extended Dedicated Gold Club ® Warranty Products Just For You Support Line Member Elevated Tech Support Line S CAN ME SI GN UP N O W petratools.com/gold...
APPLICATION Please visit the page Questions/Issues Toll free: 1-800-613-6889 petratools.com/support with your product? Contact us: support@petratools.com to get the fastest resolution We’re here to help! Website: www.petratools.com to your problem.
Page 12
To order new/extra parts or replace parts or accessories, please visit petratools.com...
The HD4000 sprayer includes a heavy-duty wand, multiple nozzle attachments, and a fully-automatic AC charger for the battery. Does the HD4000 have a screen filter to keep dirt and debris out of the tank? Yes, the HD4000 has a screen filter in the large, wide-mouth lid to keep dirt and debris out of the tank.
Page 14
Minors should not be allowed to use this sprayer. Do not use if bystanders or animals are nearby. Using this sprayer under dangerous conditions may cause injury to you, to others, or the property. Do not modify in any way that is not explicitly recommended in PetraTools videos ®...
Page 15
Questions/Issues with your product? We’re here to help! Please visit the page petratools.com/support to get the fastest resolution to your problem. Toll free: 1-800-613-6889 Contact us: support@petratools.com Website: www.petratools.com V2 0623...
Need help?
Do you have a question about the HD4000 and is the answer not in the manual?
Questions and answers
How do you know how many gallons of water to put in since the HD4000 is not marked
The PetraTools HD4000 has a 4-gallon tank. If the tank is not marked, you can determine the correct number of gallons by measuring and adding water in known increments. For example, you can use a 1-gallon container to fill the tank, counting each addition until you reach the desired amount.
This answer is automatically generated
On/off switch doesn't turn on ?
To fix the on/off switch issue for the PetraTools HD4000, follow these steps:
1. Check the Switches – Ensure the red rocker switch and silver pressure knob are turned off when not in use. Leaving them on, especially while charging, can drain the battery. The silver pressure knob should click audibly when turned counterclockwise all the way.
2. Check the Indicator Lights – The red light indicates the unit is on, while the green light shows that the battery is charged. Verify that the lights function correctly.
3. Check the Fuse – Remove the fuse from the control panel and inspect it. Ensure there is no burning inside and that the filament is intact. Replace it with the included spare if needed.
4. Check the Battery Charge – Plug the charger into the unit. If charging correctly, the charger light will turn red.
Following these steps should help resolve the on/off switch issue.
This answer is automatically generated
How long does it take to fully charge the hd4000?
Is there a way to reduce the pump pressure to close to 20 psi. In spraying Roundup, I prefer to minimize drift by using lower pressure. I have used a 22.5 psi pressure control valve at the end of the wand, but the pump keeps turning on and shutting off, which has got to be hard on pump and pump switch.
Can I spray stain on a fence
What size fuse?