Sekonda MOTION PLUS 30220 Instructions

SEKONDA MOTION PLUS SMART WATCH INSTRUCTIONS
(30220, 30221, 30223, 30224, 30225)
CHARGE YOUR SMART WATCH
- Connect and charge your watch using the magnetic USB cable provided.
- Your smart watch should be charged for at least two hours before using it for
the fi rst time.
- NOTE: Do not use a charger exceeding 5V 2A for charging.
TURN ON YOUR SMARTWATCH
- Remove the printed screen protector. Below this is an additional screen
protector. It is advised that you keep this on your watch to protect it from wear
and tear.
- Press and hold the button for 5 seconds to turn your Smart Watch on.
- The home screen of the watch will be displayed.
- From the home screen, swipe to the right to access the menu screen. From
here you can tap on any of the function icons to enter the related menu.
- Swipe right on any screen to return to the previous screen.
- The screen will turn off when your Smart Watch is not in use. To wake up the
screen press the power button or turn your wrist.
- Wrist gesture control is automatically turned on so that the screen will also
wake up when you turn your wrist. This can be turned on/off within the app, or
the screen display settings on your watch.
DOWNLOAD AND INSTALL THE APP
- To download the app please search for "SEKONDA SMART" in the app store on
your phone.
- Or scan the QR code using your smartphone camera or a QR code reader app.
The SEKONDA SMART app will work on the following smartphones:
- Android (version 7.1 and above)
- Apple iOS (version 12.0 and above)
CONNECT YOUR SMART WATCH TO THE APP
- Open the app and accept the permissions.
- Tap either "Sign In" or "Guest" to continue without creating an account.
- On the next screen you can enter your personal information and goals such as
your step count target.
- The app will then prompt to search for devices to connect to.
- Your watch has a unique Bluetooth name beginning with "Sekonda" followed
by letters and/or numbers. You can fi nd your watch's Bluetooth name by
swiping down from the home screen, tapping on the cog symbol, then going to
System > System version. Here you will see the Bluetooth name.
- Select the correct Bluetooth name from the list on your phone to connect to
your Smart Watch.
- The watch will display the correct time after pairing is successful.
SYNCHRONISE DATA WITH THE APP
- After your watch is paired with the app you can synchronise data the watch
has recorded.
- Please sync your app daily to avoid loss of recorded data. Data on the watch is
reset at midnight every day.
- To sync your data, connect to the app. On the home screen, swipe down to
sync data with the watch. "Syncing" will be displayed at the top of the page.
SET UP
On your Smart Watch:
- Swipe down from the home screen and use the + and – on the right to set
the desired screen brightness.
- Tap the cog icon to access the settings list.
- Tap "screen display"
- Tap on "screen time" to set how long the screen will stay on for.
The screen can be set to stay awake for a maximum of 30
seconds.
- Tap on "Turn wrist wake" to set how long the screen will stay on
for after you turn your wrist.
- Tap "Always on" to set the display to stay on for a longer amount of time.
Choose from 5/10/15/20mins, or Always On. The always on display is for
essential use only. Please also note that having the screen time set to
longer will consume the battery life more quickly.
- Tap "Vibration" to set the strength of the vibration that will be used for
notifi cations.
- Tap "Heart Rate" to turn on/off continuous heart rate monitoring.
- Tap "Battery" to turn on/off power saving mode. Bluetooth will be
disconnected.
- Tap "Unit Setting" to choose between Metric or Imperial measurements.
- Tap "Date" to manually set the date on the watch.
- Tap "Time" to manually set the time on the watch.
- Tap "Time display" to choose between 12hr and 24hr display.
SET A PASSWORD
- Swipe down from the home screen and tap the cog.
- Tap "Password", then "Password switch" to turn on using a password to
access your Smart Watch.
- Choose a 4-digit password and enter it twice to confi rm the password.
- The password will be set, and you will now need to enter this to access the
menus of your Smart Watch.
- To turn off the password, go back to the password menu and tap "Password
Switch" again. Enter your 4-digit password and the password will be turned off.
SET THE LANGUAGE
- Swipe down from the home screen and tap the cog.
- Tap "Language".
- Available languages are English, Spanish, Polish, Portuguese, German,
French, Czech, Slovakian, Hungarian, Italian, Romanian, Turkish, Croatian,
Dutch, Danish, Estonian, Greek.
On the SEKONDA SMART app:
Open the app and navigate to the menu by tapping on the watch icon in the
bottom right of the screen.
Set which notifi cations you would like to receive on your watch
- Select "Message push" and set which notifi cations you would like to be
displayed on your Smart Watch.
OTHER SETTINGS
- Frequent contacts – Set up to 10 frequent contacts.
- Heart rate monitoring – Turn on to allow your watch to monitor your heart
rate at all times.
- Gesture control – With this on, the screen of your watch will wake
up when you turn your wrist.
- Watch alarm – you may set up to fi ve alarms.
- Find watch – tap this and your watch will vibrate to help you fi nd it.
- Camera – use your watch as a remote shutter for taking photographs. - Camera – use your watch as a remote shutter for taking photographs.
- Drink water reminder – Set up your watch to give you reminders at
set intervals.
- Sedentary reminder - Set up your watch to give you reminders at set - Sedentary reminder - Set up your watch to give you reminders at set
intervals.
- Left hand or right hand – select which wrist you wear your watch on. - Left hand or right hand – select which wrist you wear your watch on.
CONNECTING MULTIPLE WATCHES TO ONE PHONE
You can create separate profi les for different people and switch
between these when using the app.
- Tap on the person icon in the top left.
- Tap on "Family", then tap on the + symbol in the top right.
- The "Add a family member" screen will appear. Enter the required details
then tap "Bind device".
- The app will search for nearby devices. Select the correct Bluetooth name
from the list. You may need to tap "More" to view the full list.
- Once paired, you will have the option to switch to this user's profi le.
- Up to 3 additional family accounts can be added.
- To delete an account, swipe left on it and tap the red delete button.
For the app to function correctly please take notice of the following:
- Do not pair the watch directly with the Bluetooth in your phone's settings.
Always pair the watch through the app.
- Do not turn off Bluetooth in your phone's settings.
- If you would like to receive notifi cations from the app, you must accept the
app's permissions.
USING YOUR SMART WATCH
THE SMART WATCH INTERFACE
Swipe in the opposite direction to return to the previous screen.
From the home screen
- Swipe right to display the function list – daily activity, phone call, frequent
contacts, call records, sports, sports record, heart rate, temperature, sleep,
blood pressure, blood oxygen, message, weather, female care, alarms,
calendar, timer, music, relax, calculator, fi nd phone, setting. Swipe up and
down to scroll through the list and tap a function to select it.
- Swipe left for quick access to daily activity, heart rate, blood oxygen, blood
pressure, sleep, weather, and music. When you reach "function editing" tap
this to edit which functions can be viewed by swiping left from the menu.
- Swipe down to show a screen where you can access the alarm, do not
disturb mode, torch, call settings, always on display setting, general settings,
and brightness setting on the right. There is also a symbol showing the
battery level on this screen in the top left.
- Swipe up to view new messages/notifi cations.
BUTTON
- Press the button to wake up the screen.
- Within any menu, press the button to return to the home screen.
- To turn your Smart Watch on or off hold the button down for 5 seconds.