Advertisement
We want to thank you for selecting the SP-25.
Before use
Caution:
Never connect the AC power plug before assembly has
been completed.
SAttach the dust cover last, so that assembly and
adjustments can be made most conveniently.
@ Checklist of parts
Turntable unit...
Turntable platter
Pe
Pb ee oe
e n
weettver
MUMNTMPINRM
ES WERE 5
barista
aeecu
N o e ieen rea Tastore
45-rpm adaptor .,.,....
Main unit fixing screw
..
Ground
wire (GND)
.,..
Installation diagram ..
+ mt
me
oe
@ Building your own base or cabinet for this
medel
SP-25 with a large starting torque of 1.5 kg-cm (Ib-in) has
the superior feature of reaching constant speed in 0.7
Second (at 33-1/3 rpm.)
4
For this reason we recommend
that you use durable and
heavy material.
The thickness of the base should be more than 3 cm (1-11/
64 inch).
Also use durable and stable insulators (legs).
We recommend that you purchase the optional turntable
base Technics SH-1582, designed exclusively for the SP-
25. (See Fig. 3.)
Caution
© This apparatus is double insulated, salety earth not required.
Important
eThe wires in this mains lead are coloured in accordance
with the following code:
Blue:
Brown:
Neutral
Live
As the colours of the wires in the mains lead of this apparatus
may not correspend with the coloured markings identifying
the terminals in your plug, proceed as follows.
Assembly and set-up
Assembling
is explained based on the optional Technics
installed in another cabinet,
SH-1582 is provided with screw holes (4 places) for mounting
SP-25.
3. Pull out the power cord and ground wire (GND) from under
the turntable base.
@ Connect the AC power plug.
Connect the AC power plug to an AC wall socket.
@ Connect the output terminals.
Note:
Be
sure to connect the ground terminal firmly to the
amplifier or receiver, if this cannection is not made or is
loose, a power source "HUM" will result.
@ Place the unit ina stable and horizontal position, where
there is little or no vibration.
@ Locate the unit as far away from the speakers as
possible and isolate the unit from sound radiation from
them.
@ Do not place the unit where it is exposed to direct sun,
dust, moisture or heat.
@ Keep it in 2 well ventilated place.
@ When a radio |s placed too close to the turntable and is:
played while the turntable |s in operation, interference
to AM/FM reception may result,
s
Advertisement
