1. Manuals
  2. Brands
  3. Alva Manuals
  4. Patio Heater
  5. GHP19
  6. Instruction manual

Alva GHP19 Instruction Manual

Patio heater bronze hammertone
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
AND SANS 1156 APPROVED HOSE
.
.
.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GHP19 and is the answer not in the manual?

Questions and answers

Related Manuals for Alva GHP19

Summary of Contents for Alva GHP19

  • Page 1 AND SANS 1156 APPROVED HOSE...

  • Page 2: Important Safety Information

    Retain this manual for future reference. • • • • For use with LP gas only. • • • Phone the customer care line at 086 100 ALVA (2582) or email • • • • • • • • •...
  • Page 3 HEATER SET UP PARTS DIAGRAM Cautions and FASTENERS LIST warnings. LEAK TEST USING YOUR HEATER Danger. CHANGING YOUR CYLINDER MAINTENANCE Contact an approved FREQUENTLY ASKED QUESTIONS ALVA technician. SPECIFICATIONS TROUBLESHOOTING GUIDE AFTER SALES SERVICE Do It Yourself. Instructional video available.

  • Page 4: Warranty

    GENERAL INFORMATION property damage, injury or death. For outdoor use only. For use with LPG only. 086 100 ALVA (2582) DO NOT use within surfaces. Always turn OFF the gas supply at the cylinder after use.

  • Page 5: Heater Set Up

    ASSEMBLY • • • • with the heater tightens to the left (Figure Fig.A HEATER SET UP (Figure B)
  • Page 6 Nose cone sealing washer Fig.B Before assembling the product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. M8X15mm Bolt (AA) (CC).
  • Page 7 Load the Cylinder housing assembly (E) onto the pole (D), and slide the Cylinder Housing Assembly (E) down. (Figure E) Fig.E Screw Reflector Spacers (KK) Reflector Spacer into top of Burner Assembly (C). Fig.F Connect the Burner Assembly (C) to the pole (D). Align the M5X12 Pan Head Bolt screw holes and secure burner assembly (C) onto pole (D) with...
  • Page 8 Open the igniter cap by unscrewing the cap conterclockwise. Take out the AAA - battery included in the pack with instruction manual. Insert the AAA - battery AAA -B attery into the igniter. Igniter Screw the igniter cap back clockwise. Fig.H Attach KD Domes (B) using M5 M5X8mm Bolt...
  • Page 9 Open the base cap, fill up the weight box using 12kgs of sand or soil, and the lock the weight box with water. based cap back. (Figure K) Fig.K (Figure L) Fig.L For leak test procedure see page 9. Bullnose regulator 9kg Cylinder Fig.M...

  • Page 10: Parts Diagram

    • PARTS DIAGRAM Top Dome KD Dome Burner Assembly Pole Cylinder Housing Assembly Support Bracket Wheel Assembly Base the index page.
  • Page 11 FASTENERS LIST M8 x 15mm Bolt Wing Nut M8 Nut AAA Battery Replacement AAA batteries can be purchased from Stingray, visit: M5 x 12mm www.stingray.co.za Pan Head Bolt M5 x 8mm Bolt M5 Nut 5mm Washer M6 x 25 Hexagon Head Bolt M6 Nut TOOLS REQUIRED FOR ASSEMBLY:...

  • Page 12: Using Your Heater

    • Extinguish all • If you are unsure or if you cannot tighten the connection, DO NOT operate any electrical appliances. 086 100 ALVA • Ventilate the (2582) area. Connections to be leak tested • • Check for leaks...
  • Page 13 cylinder 1½ turns. Smoke and odour caused by the heating of oils used during manufacturing will occur when lighting time. This is normal and there is no reason for alarm. Avoid inhaling the fumes! The smoke and odour cylinder should dissipate within cylinder.

  • Page 14: Maintenance

    CHANGING YOUR CYLINDER Before lighting always perform a leak test when changing your cylinder. cylinder (Figure P) Bullnose regulator 9kg Cylinder sealing washer (nose cone) is intact Fig.P (Figure B - Page 3) When changing the cylinder, ALWAYS perform a leak test as detailed on page 9, before lighting your patio heater.

  • Page 15: Frequently Asked Questions

    • Storage • • • FREQUENTLY ASKED QUESTIONS...

  • Page 16: Specifications

    How to test if your cylinder is overfilled http://www. youtube.com/ watch?v=Ya vsYE8nzCw SPECIFICATIONS &feature=plcp ALVA GHP19 Type of Gas Operating pressure Gas Consumption Heat output SANS1156-2...

  • Page 17: Troubleshooting Guide

    REMEDY Burner will not Pressure is low. light. clean it. Control not on HI. to HI. Thermocouple faulty. Replace Thermocouple. In poor location. Position properly AFTER SALES SERVICE MANUFACTURED FOR AND DISTRIBUTED BY TOLL FREE NUMBER 086 100 ALVA (2582)

Table of Contents