Table of Contents
Advertisement
Power Sources
B
Before operating your camera, you will need to use
your power adapter to:
provide power from a mains outlet
or
charge a battery pack
Notes:
• The power adapter converts current from a
household power outlet (100-240 V AC, 50-60
Hz) to the DC current used by your camera.
• If the adapter is used next to a TV, it may cause
the TV to emit noise — move the adapter away
from the TV or the aerial cable.
| Connecting the camera to a mains outlet
Use the power adapter and the DC coupler to
provide your camera with instant power from a
mains outlet.
1. Insert the DC coupler in the camera's
power source compartment.
• Insert the rear end first, then press in the DC
coupler until it clicks and locks into place.
2. Connect the DC coupler to the adapter.
3. Plug the adapter into a mains outlet.
4. Detach the DC coupler after use.
• Slide the BATTERY EJECT switch while you
pull the DC coupler outwards from the back.
• Always turn the camera off before removing
the power source.
5. Unplug the adapter from the mains
outlet when you are finished.
Advertisement
Table of Contents
