Advertisement
Quick Links
Install Noo-psyche APP
First, download the Noo-psyche APP. Install the Noo-Psyche APP on your
device and "Allow Noo-Psyche to access this device's location" to continue.
IOS: Download from App Store
Android: Download from www.noo-psyche.com/Userguidance or scan the QR
code:
Keys Instruction
How to switch the light to Auto or manual?
Indicator was
Red(manual)
Blue(auto)
Notice: Only the light always on
Connection Mode
There are two method for the APP to connect to the light: by AP mode or by
LAN mode. No matter which method is used, it can be used as long as it is
connected.
How to know if the light is on LAN or AP connection mode?
Operation
Click the R Key
How to Switch LAN and AP mode of the light?
Switch to
AP mode
LAN mode
K7mini Operation Guide
Operation
Click the L Key
Blue(auto)
If Indicator
Flashes
blue
twice
Flashes
Red
twice
Precondition
Press & hold the R key, the indicator flashes
The Indicator
blue, loosen the R key after it stops flashing
always on
Press & hold the R key, the indicator flashes
Blue(auto)
Indicator become
Red(manual)
can connect to the APP.
Means
it's on
LAN mode
AP mode
Operation
red, loosen the R key after it stops flashing
Blue(auto)
Advertisement
Related Manuals for Noo-psyche K7mini
Summary of Contents for Noo-psyche K7mini
- Page 1 K7mini Operation Guide Install Noo-psyche APP First, download the Noo-psyche APP. Install the Noo-Psyche APP on your device and “Allow Noo-Psyche to access this device's location” to continue. IOS: Download from App Store Android: Download from www.noo-psyche.com/Userguidance or scan the QR...
- Page 2 ① Switch the light on AP mode. Pls learn above “Connection Mode” ② Open the APP, click the Portrait ③ Click Apply Permission, Allow Noo-Psyche to access location ④ Click SWITCHING NETWORK. Click WLAN and keep it on. Find the K7_mini**** in the WLAN list, then enter the password (12345678) and click connect.
- Page 3 ⑤ Last step, confirm it is AP connection and click SAVE. Function After the APP and the light are connected, access the options according to your reef tank type. There are two running mode: manual and auto. E.g. LPS. Default spectrum preset There are SPS, LPS, SPS/LPS default spectrum presets.
- Page 4 Manual – One click viewing Select LPS. Switch to Manual. Pull the progress bar to adjust the brightness finally click SAVE. Auto – Sunrise and sunset scene simulation Modify parameters: ① Click Auto ② Click TIME POINT SETTING ③ Click EDIT to modify channel parameters ④...
- Page 5 Return to the homepage you will see a green dot which means running LPS setting. Export/Input spectrum settings Click Export download your spectrum settings QR code and it will save in photo album. Click import upload your saved QR code, finally click save.
-
Page 6: Operation
Configuring Master/Slave Lighting How to switch the light to Master or Slave? Indicator Operation Indicator Green Press & Hold the L Key (Master) (Slave) Green Press & Hold the L Key (Slave) (Master) ① Slaves: When LED indicator is always on, press & hold the L key until LED indicator turns green then loosen it. - Page 7 & hold the R key until the indicator flashes blue, then loosen the key to enter network waiting configurating state. ② Connect the phone device to WIFI of the 2.4GHz routing band. Open the app. click the Portrait. Click “Apply Permission” to “Allow Noo-Psyche to access this device’s location” ③...
-
Page 8: Factory Reset
RECOMMENDED TO SET THE INITIAL TOTAL BRIGHTNESS AT 50% Warranty: All of Noo-Psyche(NP) products have 12 months the warranty service from the date of purchase. If there is a quality problem within the warranty, Noo-Psyche will repair or replace the parts free of charge.