Advertisement
Quick Links
K7 PRO III Operation Guide
Install Noo-psyche APP
First, download the Noo-psyche APP. Install the Noo-Psyche APP on your
device and "Allow Noo-Psyche to access this device's location" to continue.
For IOS: Download from App Store
For Android: Download from www.noo-psyche.com/Userguidance or scan the
QR code:
Keys Instruction
How to switch the light to Auto or manual?
Indicator was
Red(manual)
Blue(auto)
Notice: Only the light always on
Connection Mode
There are two method for the APP to connect to the light: by AP mode or by
LAN mode. No matter which method is used, it can be used as long as it is
connected.
How to know if the light is on LAN or AP connection mode?
Operation
Click the R Key
How to Switch LAN and AP mode of the light?
Switch to
AP mode
LAN mode
Operation
Click the L Key
blue(auto)
If Indicator
Flashes
blue
twice
Flashes
Red
twice
Precondition
Press & hold the R key, the indicator flashes
The Indicator
blue, loosen the R key after it stops flashing
always on
Press & hold the R key, the indicator flashes
Blue(auto)
red, loosen the R key after it stops flashing
Indicator become
Blue(auto)
Red(manual)
can connect to the APP.
Means
it's on
LAN mode
AP mode
Operation
Advertisement
Related Manuals for Noo-psyche K7 PRO III
Summary of Contents for Noo-psyche K7 PRO III
- Page 1 K7 PRO III Operation Guide Install Noo-psyche APP First, download the Noo-psyche APP. Install the Noo-Psyche APP on your device and “Allow Noo-Psyche to access this device's location” to continue. For IOS: Download from App Store For Android: Download from www.noo-psyche.com/Userguidance or scan the...
- Page 2 ① Switch the light on AP mode. Pls learn above “Connection Mode” ② Open the APP, click the Portrait ③ Click Apply Permission, Allow Noo-Psyche to access location ④ Click SWITCHING NETWORK. Click WLAN and keep it on. Find the K7_Pro**** in the WLAN list, then enter the password (12345678) and click connect.
- Page 3 Function After the APP and the light are connected, access the options according to your reef tank type. There are two running mode: manual and auto. E.g. LPS. Default spectrum preset There are SPS, LPS, SPS/LPS default spectrum presets. If you want to use the default spectrum settings: select Auto, click FACTORY SETTINGS, finaly Save.
- Page 4 Auto – Sunrise and sunset scene simulation Modify parameters: ① Click Auto ② Click TIME POINT SETTING ③ Click EDIT to modify channel parameters...
- Page 5 ④ Set the brightness of each channel at the time point, click confirm. Click close when all is done ⑤ Click SAVE. If you want to quickly check the spectrum, click Demo Mode Return to the homepage you will see a green dot which means running LPS setting.
-
Page 6: Lan Connection
& hold the R key until the indicator flashes blue, then loosen the key to enter network waiting configurating state. ② Connect the phone device to WIFI of the 2.4GHz routing band. Open the app. click the Portrait. Click “Apply Permission” to “Allow Noo-Psyche to access this device’s location”... -
Page 7: Factory Reset
③ Select LAN connection and enter the WI-FI password of 2.4GHz routing band, click save. It will try Connecting... and finished in about 30s, finally click OK Factory Reset When the LED indicator is always on red, press & hold the R Key until ONCE THE LIGHT IS RESET TO FACTORY SETTINGS, ITS indicator turn off. -
Page 8: Specification
Warranty: All of Noo-Psyche(NP) products have 12 months the warranty service from the date of purchase. If there is a quality problem within the warranty, Noo-Psyche will repair or replace the parts free of charge. The warranty is not covered if the product has been damaged due to modification, accident, mishandling, misuse, or if it has been repaired without authorization.