Symbols And Decals - U.S.SAWS MC-800 Operating Manual

3.0 SYMBOLS & DECALS
For Safe Operation
You must be qualified for safe operation of the U.S.SAWS MC-800
machine. You must clearly understand the written instructions supplied
by U.S.SAWS, be trained - including actual operation - & know the safety
rules & regulations for the job site. It is a safety practice to point out & ex-
plain safety signs & practices to others & to make sure they understand
the importance of following these instructions.
Be Safe
Human error is the result of many factors: carelessness, fatigue, sensory
overload, preoccupation, unfamiliarity with the machine or attachments,
or drugs or alcohol, to name a few. You can avoid serious injury or death
caused by these & other unsafe work practices. Be safe and never as-
sume accidents cannot happen to you.
For your safety and the safety of others, act safely and encourage your
fellow workers to act safely as well.
Read and understand operator's
manual before using this machine.
R
o
Failure to follow operating Instruc-
u
F
tions could result in injury or dam-
I
i
age to equipment.
e
Use only diamond blades (steel cen-
W
tered diamond cutting-off wheels) with
this machine. RPM rating on blade must
exceed machine max rpm rating. The
use of any other blade could result in
death or serious injury.
Flying debris and loud noise
hazards. Wear ear and eye
protection
Engine exhaust contains poi-
sonous carbon monoxide gas.
Breathing it could cause death.
Operate machine in well venti-
lated area.
AVOID INJURY.
Do NOT operate with guard re-
moved. Replace guard before
operating machine.
S Y M B O L S & D E C A L S
Surface Prep
Division
Wear safety boots when
operating this machine
Wear appropriate clothing
Wear Head Protection, breath-
ing protection, and the use of
hearing protection is manda-
tory
Wear hand protection
Wear proper electrostatic
grounding equipment at all
times. Static discharge during
fueling can cause explosion
Keep all guards in place
Rotating blade hazard.
Do NOT operate with guard up.
R
haz
Keep hands and feet away.
g
a
TO AVOID INJURY.
Always inspect saw blades be-
fore use. Replace all cracked
or damaged blades.
P: 877-817- 6687 F: 813-621-7125
Visit us at www.ussaws.com
sales@ussaws.com
3