Table of Contents
Advertisement
Section 3
Before configuring the Print Server's network setting, please take note of your computer's
TCP/IP setting.
Step 1
Click on Start, Run, and type command (for Windows 95/98/ME) or cmd (for Windows 2000/
XP) and click OK.
Step 2
At the command prompt, type ipconfig and press Enter.
Step 3
Write down the information for the IP Address, Subnet Mask, and Default Gateway. You will
need these information later.
Step 4
Run the PS Utility by going to Start, (All) Programs, PS Utility, PS Utility v2.00.
Step 5
Make sure the Print Server is listed under the Device Name and click on Change IP Address.
Configuring Network Setting
Advertisement
Table of Contents
