Section 2
Before configuring the Print Server's network settings, please take note of your computer's
TCP/IP setting.
Step 1
Click on Start, Run, and type cmd and click OK.
Step 2
At the command prompt, type ipconfig and press Enter.
Step 3
Write down the information for the IP Address, Subnet Mask, and Default Gateway. You will
need this information later.
Step 4
Insert the Utility CD into your CD-ROM drive for the autorun screen. Select Run MFP PS Setup
Wizard from the menu.
Note:
If the autorun window does not appear automatically, go to Start, Run, and type
D:\PS-Wizard\MFP-PSWizard.exe (where D is the letter of your CD drive) and click OK.
Configuring Network Settings