Table of Contents
Advertisement
Using the timer
This timer turns power to your system OFF at the set time (Max.
2 hours, settable at 30 minutes interval,
it lets you fall asleep
listening to music.
by remote control'oniyr
®Make sure that you have completed "Setting the time'' on page 10.
•Switch on the power.
The figure shows how to set the system to standby mode after
30 minutes.
While enjoying the desired source:
Press
SLEEP
to select the desired time.
Every time you press the button;
• 30—► 60—> 90~» 120-^ OFF—,
The system is turned off after the set time has elapsed.
To cancel the sleep timer:
Press SLEEP to select "OFF".
To confirm the remaining time:
(only while power is ON)
Press SLEEP.
To change the time remaining during operation:
Press SLEEP to show the remaining time then press SLEEP to se¬
lect the desired time.
•The sleep timer turns OFF automatically the moment you attempt
to edit-record a CD using CD Manager function.
•The sleep timer can be used in combination with the play/record
timer.
The sleep timer always has priority.
Be sure not to overlap timer settings.
Using an external unit m
Listening to an external source
(See page 7 for external unit connection.)
1. Press AUX.
The power will come on automatically.
2. Start playback from the external source. (For details, refer to the
owner's manual of the equipment.)
Recording from an external source
1. Follow steps 1-3 on page 21.
2. Press AUX.
3. Press • REC/STOP (recording starts).
4. Start playback from the external source. (For details, refer to the
owner's manual of the equipment.)
Listening with headphones
Reduce the volume level, and connect the headphones.
Plug type: 3.5 mm stereo
Avoid listening for prolonged periods of time to prevent hearing
damage.
Advertisement
Table of Contents
