Table of Contents
Advertisement
iWTOi: ..i:..".''
v
\\y ^^'rA'u:',c\uw:^?t«i,!7n>vi:TTVB., . , s ,,»\-.\i:i c ,:'OTvc«v'os;A
Types of topes which con be recorded
The unit automatically identifies the type of tape.
NORMAL POSITION/TYPE 1
O
HIGH POSITION/TYPE II
O
METAL POSITION/TYPE IV
X
This system cannot make a recording or erasing correctly, if metal
position tapes are used.
To record from the beginning of the tape G
You cannot record on the leader part of the tape. Before recording,
wind the tape past the leader to a point where recording can start
immediately.
How volume, sound quality/field and super
woofer affect recording
The tape you are recording is not affected whatsoever by changes
in volume, sound quality/field or super woofer.
•In recording, sound quality/field are set automatically to "FLAT'.
•You can change volume and super woofer effect for the playback
sound.
[.To erase a recorded sound E
H Press TAPE.
B Insert the recorded tape into deck 2.
Except'SC-AK25 model for Australia and NewZealand
Press DOLBY NR so that the Dolby NR indica¬
tor goes off.
F3 Press REV MODE to select reverse mode.
B Press 9 REC/STOP.
Note
•You cannot open deck 1 while recording.
•You cannot fast-forward or rewind one deck while recording with
the other.
Your attention is drawn to the fact that recording pre¬
recorded tapes or discs or other published or broadcast ma¬
terial may infringe copyright laws.
20
Advertisement
Table of Contents
