Related Manuals for BASIS AUDIO SIGNATURE Series
Summary of Contents for BASIS AUDIO SIGNATURE Series
- Page 1 BASIS AUDIO, INC. 2001 SIGNATURE SERIES TURNTABLE USER’S GUIDE 26 Clinton Drive, Unit 116, Hollis, NH 03049 USA ▪ T: 603-889-4776 ▪ www.basisaudio.com...
- Page 2 INTRODUCTION Thank you for purchasing the BASIS 2001 turntable. We are confident that you will come to view your decision to use a BASIS turntable as one of the most musically rewarding equipment choices in your audio experience. The incredible precision of the BASIS bearing and platter system will allow you to feel the emotion of the music’s natural flow.
- Page 3 Unpack the sub chassis. CAUTION: take care not to cut into the sub chassis when opening the package. If you use a knife to cut the tape, cut just deep enough to cut the tape. Fit the bearing into the top of the sub chassis (the top side has a counter bore or sunken area) and rotate the bearing so that the screw holes in the bearing line up with the holes in the sub chassis.
- Page 4 Note that the underside of the platter has an arrow. Note that the bearing has a black line on the outer surface. When placing the platter on the bearing align the arrow and line. This orientation results in the most accurate rotating assembly, with the lowest possible wow and flutter.
- Page 5 QUESTIONS AND ANSWERS CONCERNING THE 2001 TURNTABLE Question: “What are the sonic affects of raising or lowering the sub chassis by turning all 4 pods a certain number of turns?” Answer: There are none. This merely adjusts the height of the sub chassis, which does not affect the sound.
- Page 6 BASIS or an authorized service representative. Should this product fail to meet the above warranty purchaser assumes obligations to re- package and return the unit to the dealer, BASIS AUDIO, INC., or a designated service representative at his/her own expense.