Advertisement
ORON
> M
*
ree
wm
-
*
EQUALIZING RECORDS/FM
BROADCASTS
(Fig. 1)
Turn each component's power ON.
Set the amplifier tape monitor switch to TAPE or ON.
Start the program source.
|
Turn EQUALIZER
switch ON.
E
Adjust amplifier volume control and GE-3's equalization
to achieve desired sound coloration and presence.
Check equalization effect by turning EQUALIZER
switch on and off.
EQUALIZING TAPE DECK PLAYBACK
(Fig. 2)
Turn each component's power ON,
Set amplifier's tape monitor switch to TAPE or ON,
Turn EQUALIZER
switch ON,
Turn EQ REC switch ON.
Turn TAPE MONI switch ON.
Start tape deck playback,
Adjust amplifier volume control and GE-3's equalization
to achieve desired sound coloration and presence,
Check equalization effect by turning EQUALIZER
switch on and off.
EQUALIZING
RECORDS AND FM BROAD-
CASTS FOR RECORDING (Fig. 1)
Turn each component's power ON.
Turn EQUALIZER
switch ON.
Turn EQ REC switch ON and TAPE MONI
switch OFF.
YAMABA
maruna, sousa arene GAAPReC EGUALIZER
GE-3
4. Start recording source Guntai: FM tuner, etc, ed
5. Adjust equalization to taste.
6. Prepare tape deck (tape type, recording level, etc.) and
begin recording.
*
Even if the EQ switch is ON, the source being recorded
will not be equalized if the EQ REC switch is OFF.
*
Recording in progress can be monitored by the GE-3's
TAPE MONI switch ON.
B
APPLICATIONS
e
Reduction of Tape Hiss
:
Because tape hiss is in the high frequency range, it can be
easily reduced by setting the 4 kHz to 16 kHz control levers
at +4 dB during recording, and lowering them to —4 dB
during playback. This will bring the frequency response
back to "'O'' but with the hiss eliminated!
When recording
On playback
Adiust the tone
| ON, when recording
OFF
.
ON
ON
(SE-3
e. Compensation for room acoustics
Speaker characteristics, type and location of feat: wall
materials, rugs, curtains, and other physical conditions all
affect the tonal response of the listening room. By adjusting
the equalizer levels for both channels it is possible to com-
pensate for these factors and greatly improve the sound,
e
Emphasizing preferred frequencies
The GE-3 gives you tremendous flexibility in adjusting the
speaker sound to achieve the tone and coloration of music
that you prefer. If you like bass, set the low frequency levels
higher for more presence. If you like more vocal definition,
the middle frequencies wil! provide the sound you prefer.
And if you like overall clarity and brightness, high fre-
quency levels can be adjusted accordingly. In short, y ou can
. tailor your system to produce the sound you prefer under.
—
all listening conditions.
.€
Better sound from your car stereo
Car stereo systems tend to emphasize the midranges at the
expense of the lowest and highest frequencies. With the
GE-3 you can adjust the bass and treble levels accordingly
to make your car stereo sound the best it ever has.
YAMAHA
marma
soumo
armeo
cnamac
EALER
GE-3
Adjust the tone
ON
ON
Advertisement
