Advertisement
This lever effectively emphasizes high frequencies in
order to give the effect of increased fidelity. Lowering
the setting decreases the sharpness. of higher frequency
sounds.
e
16kHz
This lever controls the overall sound presence, Higher
settings will emphasize high frequency sounds such as
cymbals. Conversely, if high frequency noise such as
tape hiss is present, lowering this lever will reduce it. -
pu.
F
-
OFF or ON.
@ ATT control (attenuator)
i
A
E^ T
a
STEREO
|
APE)
—sreREO ]
=
[TAPE
| STEREO
When the equalizer levers are set to high levels, or the |
|
: ]
AMP
0].
|
wi
AME
|
CK
`
AMP
EQUALIZER
switch is in the ON position, the volume level: .
is also often increased. When this happens, adjustment of
`
the ATT level will retain the equalized signal while reducing
volume to the EQUALIZER
OFF level. This controt is also
`
used to eliminate the possibility « of. distortion due to high
level input signals.
@ EQUALIZER switch
Press to turn ON, which brings the equalizer into effect to
modify the frequency. Turn the switch OFF to terminate
equalization.
| STEREO
|
| STEREO
Q EQ REC switch (equalizer recording)
|
p
ME
|
AMP
With this switch pressed ON, the output to the tape deck is
|
equalized and will be recorded in the equalized mode. When
this switch is OFF, unequalized output is sent to the tape
deck.
@ TAPE MONI switch (tape monitor)
in the ON position, a tape deck connected to the GE-3 is
played back, even during recording. In the OFF position,
other music sources connected to the amplifier are played
(AM/FM tuner, turntable, mic, etc.).
Advertisement
