Change Settings; Picture; Sound - Philips BDP5500 User Manual

3 Change settings

This section helps you change the settings of
this player.
1
2
3
Note
‡
You cannot change a menu option that is grayed out.
‡
To return to the previous menu, press . To exit the
menu, press .

Picture

1
Press .
2
Select [Setup] > [Video] to access the
video setup options.
‡ [TV display]: Select a picture display
IRUPDW WR ÀW WKH 79 VFUHHQ
‡ [HDMI video]: Select an HDMI video
resolution.
‡ [HDMI Deep Color]: Display colors
with more shades and hues when the
video content is recorded in Deep
Color and the TV supports this feature.
‡ [Picture settings] 6HOHFW D SUHGHÀQHG
color setting.
18 EN
Watch 3D video
‡ [Watch 3D video]: Set to 3D or 2D
output when playing a Blu-ray 3D disc.
The player must be connected to a 3D
TV through HDMI.
Note
‡
If you change a setting, make sure that the TV supports
the new setting.
‡
For settings related to HDMI, the TV must be
connected through HDMI.
‡
For the composite connection (via the VIDEO
connector), select a video resolution of 480i/576i
or 480p/576p under [HDMI video] to enable video
output.

Sound

1
Press .
2
Select [Setup] > [Audio] to access the
audio setup options.
‡ [Night mode]: Select quiet or full
dynamic sound. Night mode decreases
the volume of loud sound and
increases the volume of soft sound
(such as speech).
‡ [Neo 6]: Enable or disable a surround
sound effect which is converted from
2.0 channel audio.
‡ [HDMI Audio]: Set an HDMI audio
format when this player is connected
through HDMI.
‡ [Digital Audio]: Select an audio format
for the sound output when this
player is connected through a digital
connector (coaxial).
‡ [PCM Downsampling]: Set the
sampling rate for PCM audio output
when this player is connected through
a digital connector (coaxial).