Download
Share
Print this page
  1. Manuals
  2. Brands
  3. SurePoint Manuals
  4. Controller
  5. 396-6562Y1
  6. Manual

SurePoint 396-6562Y1 Manual

Agleader incommand 800 sentinel setup with task control
Hide thumbs

Advertisement

Quick Links

Download this manual
396-6562Y1
AgLeader InCommand
800 Sentinel Setup
With Task Control
Operator should read this
manual before operating the
system.
396-6562Y1 AgLeader InCommand 800
Revised 03/23/2024
Sentinel Setup With Task Control
© 2010-2024 SurePoint Ag Systems Inc.

Advertisement

loading
Need help?

Need help?

Do you have a question about the 396-6562Y1 and is the answer not in the manual?

Questions and answers

Related Manuals for SurePoint 396-6562Y1

Summary of Contents for SurePoint 396-6562Y1

  • Page 1 396-6562Y1 AgLeader InCommand 800 Sentinel Setup With Task Control Operator should read this manual before operating the system. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 2 Program Sentinel controller: Perform setups per 396-4035Y1 manual. Set Sentinel for RX to operate correctly in Application screen. Perform all Setup steps. Perform all Application steps. Verify. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 3 Leader dealer and purchase the unlocks. These unlocks are NOT free and must be purchased and installed by your dealer. STEP 3 Press the tab. Press the tab. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 4 AgLeader display. Leave this checked when using DirectCommand Gen2 ISO Liquid. • When unchecked, mapping delays are determined by the “look-ahead” interval stored in the AgLeader display. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 5 Screen. Home STEP 9 Press tab. NOTE – After Enabling the UT, the now blue. The UT can now be viewed and programmed. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 6 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 7 Sentinel controller, Controller will reboot select all as indicated in this screenshot. Select to save settings to Task Control. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 8 Sentinel Rate Control system. Scan or click the QR Code to go to the Sentinel Instructional Videos Playlist on YouTube. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 9 Some steps may be by- passed due to your current setup. Press the Tab. Press the tab to get started. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 10 Using a tape measure, check mark the tractor profile. attachments that your tractor has and fill out the measurements. When completed, press to continue. Press to continue. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 11 If your implement is already setup, select it in the Enter Make and Model of your new implement. drop-down menu. To setup a new implement: Press to proceed. Press tab to proceed. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 12 The Application controller (Sentinel) will need to The Sentinel Rate Controller will need to be setup. be installed and setup. Press to proceed. Select to proceed. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 13 Make and Model of the Sentinel Controller will need to be setup. Check mark Supports Rate Control. Press the drop-down arrow Press to proceed. enter in the Make. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 14 This is the number of product tanks & You cannot proceed until all selections are products that will be used. made. Select and Press to proceed. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 15 This must match the settings must match the setup previously performed in previously setup for the Sentinel controller. the Sentinel configuration. Press to proceed. Press to proceed. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 16 Implement Wizard: Hitch Point Configuration Implement Wizard: Implement Name STEP 35 STEP 36 Fill out this information. Confirmation page. Press to proceed. Press to proceed. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 17 To check, add, or change any equipment, Press to proceed. press tab. Equipment and controllers are now setup. Press to return to the Home setup screen. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 18 Vehicle, Implement, and Controller confirmation. Press to proceed. Press tab to proceed. Management Selection STEP 43 Enter all information as needed. Press to proceed. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 19 Begin applying Liquid via Sentinel. Sentinel can be viewed in the UT screen Application and mapping can be viewed in this screen . Section control can be switched using 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 20 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 21 Grower, Farm, Field Grower, Farm, Field STEP 1 STEP 2 Power on the display and the Home Screen Select should be showing. Select Setup 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 22 Enter Business information, as needed. This is your equipment. This is for data management for data management only. only. Press the to return to the home screen. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 23 Using the General tab, adjust Brightness/Volume, Time/Date, Time Zone, Language. Country, and Operating Units to match your preferences. Select ISOBUS. Enable Task Controller. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 24 AgLeader dealer. Installed from this page. Check with your AgLeader dealer for detailed information. Select 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 25 AgLeader dealer for instructions on how to setup your GPS/Guidance system. Press to go back to the home screen. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 26 STEP 21 STEP 22 If using an existing Vehicle, select the vehicle Select Application from the drop-down menu. If creating a new vehicle, press 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 27 Vehicle Name: This should be the vehicle that Antenna Offsets: Confirm antenna location was previously setup. and measurements for your vehicle. Press to continue. Press to continue. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 28 Configuration Setup Configuration Setup STEP 29 STEP 30 Enter Make of your Implement. Make and Model: Select Make. Press to continue. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 29 Make and Model: This confirms the Implement Attachment Type: Use the drop-down menu to settings. select the Implement Attachment Type. Press to continue. Press to continue. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 30 STEP 37 STEP 38 Rate Controller. Device: From the drop-down menu, select the correct Device, and Direct Type. Press to continue. Press to continue. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 31 STEP 40 Meter Calibration: Meter Calibration: Enter the Flow Meter Calibration Number that is labeled on your flow meter. The Flow Cal number for SurePoint flowmeters is on the serial number sticker on the side of the flowmeter. Press to continue.
  • Page 32 Number of Boom Section: Enter the number of Nozzle Spacing for your application. boom sections being used. Press to continue. Press to continue. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 33 Application Point Offset: Enter the correct Signal Type/Valve Type: From the drop-down dimensions. menu, select the valve type that is being used. Press to continue. Press to continue. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 34 STEP 54 Implement Name: Confirms Implement being Implement: Summary of Implement, used. controller, and tank being used. Press to continue. Press to continue. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 35 Configuration Setup Configuration Setup STEP 57 STEP 58 Configuration Setup: Page 1 Summary Configuration Setup: Summary details. Press to continue. Select 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 36 Refer to the operator’s manual or contact manual or contact an AgLeader dealer for more an AgLeader dealer for more information. information. Press to continue. Press 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 37 Configuration Setup Configuration Setup STEP 65 STEP 66 Controller Settings: Feedback Type set to Flow Meter. Check Flow Meter Calibration for Select accuracy. Select 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 38 Configuration Setup STEP 67 STEP 68 These are Control Valve Settings: critical . Set these for SurePoint systems. Control Valve: PWM 12 volt PWM Frequency: 100 Select PWM Gain: 800 (decrease if rate is varying; increase to adjust more quickly.
  • Page 39 Configuration Setup Configuration Setup STEP 73 STEP 74 Pressure Sensor Calibration. Pressure Sensor Calibration. If using a SurePoint pressure transducer, set as If using a SurePoint pressure transducer, set as depicted. depicted. Press to continue. Press to continue.
  • Page 40 STEP 77 STEP 78 Operating Configuration Selection. In the drop-down menu, select the vehicle and implement that was setup. Select Press to continue. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 41 Application Application STEP 81 STEP 82 Press to continue. Event Selection. Select: Start a New Event or Resume an Old Event. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 42 Application Rate Setup STEP 85 STEP 86 Target Rates will need to be setup. Select located in the Target Rate area. Select 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 43 Select RX, if using prescriptions. Rate Setup Rate Setup STEP 90 STEP 89 Enter information, if needed. The system is ready to apply Liquid. Select 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 44 Select Select Settings. Manual Speed Entry Manual Speed Entry STEP 93 STEP 94 Configuration Setup. Select using the drop-down menu. Select 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 45 Change Primary Source setting from Manual Refer to the operator’s manual or contact an Speed to Display GPS for normal operation. AgLeader dealer for additional information. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 46 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 47 4004700-ENG Rev. U InCommand 800 Display User Guide 2006251-ENG Rev. A ISOBUS Liquid Module 2006017-ENG InCommand ISO Liquid Control 2006034-ENG InCommand Aux Functions 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 48 AgLeader ISO Liquid Control STEP 1 Power on the display and the Home Screen should be showing. Select Setup STEP 2 Select 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 49 Use the to edit or add information. Use the to edit or add information. Press the return arrow. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 50 Country and Operating Units to match your Set as needed for your operation. preferences. Select to continue. Select ISOBUS Settings. Enable Video will not be used. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 51 This information was copied from AgLeader Operation manual . PN 4004700-ENG Rev. U STEP 11 Display: Information on this screen can be edited as needed. This is optional. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 52 AgLeader dealer. installed from this page. Check with your AgLeader dealer for detailed information. Select- 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 53 UT Setup for ISO Rate Control UT Setup for ISO Rate Control STEP 19 STEP 18 To view the ISOBUS screen select. Press Press to continue. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 54 UT Setup for ISO Rate Control STEP 22 STEP 23 This page shows the Number of Sections currently setup. Press Press to continue. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 55 STEP 26 Confirm Section Overview. If correct press to continue. If incorrect press to go back to previous pages and re-enter correct information 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 56 UT Setup for ISO Rate Control UT Setup for ISO Rate Control STEP 29 STEP 30 Press to Edit Profile and continue. Press 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 57 UT Setup for ISO Rate Control UT Setup for ISO Rate Control STEP 33 STEP 34 Press to continue. Press to continue. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 58 This is the supply Tank that will be used. Refer to the AgLeader Operator’s manual for Example (Main Tank). further information. Press to continue. Press to continue. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 59 For SurePoint systems, Aux Valve Behavior will Control Valve Configuration and Feedback Type be set to Closed, Control Valve behavior will be for your operation. If using a SurePoint Pump, set to Closed. select PWM 12v. Feedback type will be set to Refer to the AgLeader Operator’s Manual for...
  • Page 60 STEP 43 STEP 44 The controller will reset. Press to continue. Press to continue. UT Setup for ISO Rate Control STEP 45 Press 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 61 Liquid Control UT Setup for ISO Rate Control STEP 46 Change Settings as follows: SurePoint Tower Settings SurePoint PR Series PumpRight Hydraulic Pump Settings 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 62 UT Setup for ISO Rate Control UT Setup for ISO Rate Control STEP 49 STEP 50 Press to continue. Press to calibrate the Pressure Sensor. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 63 UT Setup for ISO Rate Control STEP 51 STEP 52 From the drop-down menu, select Single Set From the drop-down menu, select Main. Point, if using a SurePoint Pressure Sensor. Press to continue. Press to continue. UT Setup for ISO Rate Control...
  • Page 64 UT Setup for ISO Rate Control UT Setup for ISO Rate Control STEP 57 STEP 58 From the drop-down menu, select Manual Calibration. Press Press to continue. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 65 Run Screen. If the pump uses a Pump Speed Sensor, enter the Calibration Number for the sensor. Press to continue. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 66 UT Setup for ISO Rate Control STEP 65 STEP 66 Enter information for your operation as needed., Select to edit Chemical Press to continue. Density. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 67 Refer to AgLeader Auxiliary Switch operation manual for your model of switch. Proceed to Application Setup. Press to get back to the Main AgLeader Screen. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 68 STEP 72 STEP 73 If using an existing Vehicle, select it from the Select Application drop-down menu. If creating a new vehicle, press 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 69 Antenna Offsets: Confirm antenna location Vehicle Name: This should be the vehicle that and measurements for your vehicle. was previously setup. Press to continue. Press to continue. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 70 Configuration Setup Configuration Setup STEP 80 STEP 81 Make and Model: Select Make. Enter Make of your Implement. Press to continue. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 71 Make and Model: This confirms the Implement Attachment Type: Use the drop-down menu to settings. select the Implement Attachment Type. Press to continue. Press to continue. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 72 Configuration Setup Configuration Setup STEP 88 STEP 89 Rate Controller. From the Device drop-down menu, select Press to continue. ISOBUS. Press to continue. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 73 Container: Name your chemical container, enter Capacity and Units. Press to continue. This should match settings that were previously setup in the UT setup. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 74 STEP 96 STEP 97 Sections: Confirm Number of Boom Section Enter Full Swath Width for your implement. Valves. Press to continue. Press to continue. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 75 Press to continue. Press to continue. Configuration Setup Configuration Setup STEP 100 STEP 101 Confirmation page. Press to continue. Press to continue. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 76 Press to continue. Configuration Setup Configuration Setup STEP 104 STEP 105 Confirm settings. Confirm Speed Source. Press to continue. Press to continue. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 77 Set Turn-On and Turn-Off times, as needed. Select Outside Boundary Option for your operational needs. Press to continue. Select Coverage Options for your operational needs. Select 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 78 STEP 113 Choose an existing product or select the Build or select a product. create a new product. Select to continue. Select to continue. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 79 Use the drop-down menu or Press the to edit, if all information is correct. to make changes. Press to continue. Press to continue. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 80 Turn on Master Switch, Select Rate, Turn on Press to continue. Section Control and begin applying. If a manual speed is needed for testing, press and select Settings. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 81 STEP 124 STEP 125 Speed Input: Select Manual Speed and enter a Manual Speed Select use the drop-down MPH. menu. Press to continue. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.
  • Page 82 Go back to Settings < Configuration Settings < Speed Input < Primary Source Change Primary Source setting from Manual Speed to Display GPS for normal operation. 396-6562Y1 AgLeader InCommand 800 Revised 03/23/2024 Sentinel Setup With Task Control © 2010-2024 SurePoint Ag Systems Inc.