Table of Contents
Advertisement
HP 8481A/82A/83A
08481-90049
Table 3. Recommended Test Equipment
Use^
Instrument Type
Critical Specifications
Suggested Model
Digital Voltmeter
Range: 100 mVdc to 100 Vdc
Input Impedance: 100 mfl
Resolution: 4-digit
Accuracy: ±0.05% ±1 digit
HP 3466A
T
Oscilloscope
Bandwidth: dc to 50 MHz
Sensitivity: Vertical, 0.2 V/div
Horizontal, 1 ms/div
HP 1741A or 1980B
A,T
Ohmmeter
Range: 1 — 100,OOOQ
Accuracy: ±5%
HP 3466A
T
DC Power Supply
Range: 5 to 15 Vdc
HP 6214B
T
1 A = Adjustment, T
Troubleshooting
Installation
Initial Inspection
Inspect the shipping container. If the container or packing material
is damaged, it should be kept until the contents of the shipment have
been checked mechanically and electrically. If there is mechanical
damage or if the instrument does not pass the performance tests,
notify the nearest Hewlett-Packard office. Keep the damaged shipping
materials (if any) for inspection by the carrier and a Hewlett-Packard
representative.
Storage and Shipment
Environment
The instrument should be stored in a clean, dry environment. The
following limitations apply to both storage and shipment:
Temperature . ...
Relative humidity
Altitude
-40 to ±75°C
<95%
< 7,600 metres (25 000 ft)
Original Packaging
Containers and materials identical to those used in factory packaging
are available through Hewlett-Packard offices. H the instrument is being
returned to Hewlett-Packard for servicing, attach a tag indicating the
type of service required, return address, model number, and serial
number. Also, mark the container FRAGILE to eissure careful handling.
In any correspondence, refer to the instrument by model number and
serial number.
5
Advertisement
Table of Contents
