Subscribe to Our Youtube Channel
Related Manuals for siegen power S0771.V2
Summary of Contents for siegen power S0771.V2
- Page 1 INSTRUCTIONS FOR MINIMIG WELDER STOCK CODE: S0771.V2 Original Language Version S0771.V2 Issue: 2 - 10/02/10...
- Page 2 INSTRUCTION mANUAL STOCK CODE S0771.V2 MINIMIG WELDER Thank you for purchasing a Siegen product. manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: BEFORE USING THIS PRODUCT, PLEASE READ THE INSTRUCTIONS CAREFULLY. MAKE CAREFUL NOTE OF SAFETY INSTRUCTIONS, WARNINGS AND CAUTIONS.
- Page 3 When wire has fed through, switch welder off and unplug from mains. 3.3.6. a) Thread contact tip over wire and screw into place. b) Grasp gas cup in right hand, push onto torch head and turn clockwise only. Original Language Version S0771.V2 Issue: 2 - 10/02/10...
- Page 4 Clean the rollers weekly, especially the feed roller groove, removing all dust deposits. 6.2. Torch: Protect the torch cable assembly from mechanical wear. Clean the liner from the machine forwards by using compressed air. If the liner is blocked it must be replaced. Original Language Version S0771.V2 Issue: 2 - 10/02/10...
- Page 5 Bring torch closer to workpiece. Excessive penetration Weld current too high Decrease current and wire speed (Section 4). Weld speed too slow move torch faster. Incorrect distance of torch to workpiece Torch distance should be 8-10mm. Original Language Version S0771.V2 Issue: 2 - 10/02/10...
- Page 6 IMPORTANT: No liability is accepted for incorrect use of this equipment. WARRANTY: Guarantee 12 months from purchase date, proof of which will be required for any claim. Sole UK Distributor, Siegen Tools, Sealey Group, sales@siegen.co.uk Kempson Way, Suffolk Business Park, Bury St. Edmunds, Suffolk, IP32 7AR email Original Language Version S0771.V2 Issue: 2 - 10/02/10...
Need help?
Do you have a question about the S0771.V2 and is the answer not in the manual?
Questions and answers