Subscribe to Our Youtube Channel
Related Manuals for siegen power S0816
Summary of Contents for siegen power S0816
- Page 1 INSTRUCTIONS FOR WELDERS STOCK CODES: S0816 S0817 Original Language Version S0816, S0817 Issue: 2 - 10/02/10...
- Page 2 Keep unauthorised persons away from the work area. Any persons working within the area must wear a protective head shield and gloves. operators must receive adequate training before using the welder. Stand correctly keeping a good footing and balance, ensure the floor is not slippery and wear non-slip shoes. Original Language Version S0816, S0817 Issue: 2 - 10/02/10...
- Page 3 Stock Code:S0816 Welding Current..... 30 - 150A Stock Code:S0817 Welding Current..... 30 - 180A Wire Capacity - steel .
- Page 4 The current to the electrode is set using the rotary switch on the front of the control panel. The S0816 has a four position switch (See fig.9) and the S0817 has a six switch position switch, (See fig.10).
- Page 5 In this case, open the gearbox, remove the worn or damaged gears and replace with new ones. Original Language Version S0816, S0817 Issue: 2 - 10/02/10...
- Page 6 IMPORTANT: no liability is accepted for incorrect use of this equipment. WARRANTY: Guarantee 12 months from purchase date, proof of which will be required for any claim. Sole UK Distributor, Siegen Tools, Sealey Group, sales@siegen.co.uk email Kempson Way, Suffolk Business Park, Bury St. Edmunds, Suffolk, IP32 7AR Original Language Version S0816, S0817 Issue: 2 - 10/02/10...
Need help?
Do you have a question about the S0816 and is the answer not in the manual?
Questions and answers