Technics Quartz ST-610L Service Manual page 4

. ST-610L
m@ DISASSEMBLY INSTRUCTIONS
"ATTENTION SERVICER"
Some chassis components may have sharp edges. Be careful when disassembling and servicing.
———_______—_—__—_,
1. Remove the 2 screws (@, @).
Remove the 5 screws (@~@). 2. Remove the front panel in the direction of the arrow.
Ref. No. Removal of the Operation Switch Ref. No. :
3 P.C.B. and LED P.C.B. 4 Removal of the Main P.C.B.
Procedure Procedure 1. Remove the 2 connector (CN701, CN702).
1-2-3 1-4 2. Remove the 4 screws (Q@~Q).
@ LED P.C.B.
@Remove the 1 screw (@).
@ Operation Switch P.C.B.
e@Remove the 4 screws (Q@~@).
/
CN702
1. Remove the 2 connector (CN701, CN702).
2. Remove the 3 screws (@~®).
3. Remove the FL drive P.C.B. in the direction of the arrow.
3. Remove the 4 screws (Q@~®@).
4. Remove the main P.C.B. in the direction of the arrow.