Safety Precautions; Symbols Used In The Manual; Symbols On The Implement - Parkside PGK 1400 B2 Translation Of The Original Instructions

Noise and vibration values have been
determined according to the standards and
regulations named in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power equipment to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning:
The vibration emission value may
differ during actual use of the pow-
er equipment from the stated value
depending on the manner in which
the power equipment is used.
Safety precautions aimed at protect-
ing the user should be based on
estimated exposure under actual
usage conditions (all parts of the
operating cycle are to be consid-
ered, including, for example, times
during which the power equipment
is turned off and times when the
equipment is turned on but is run-
ning idle).

Safety precautions

This section deals with the basic safety
regulations while working with the electric
tiller.
Symbols used in the
manual
Warning symbols with
information on damage
and injury prevention
Risk of burns!
Instruction symbols with infor-
mation on preventing dam-
age
Unplug the machine.
Wear protective gloves when
carrying out maintenance
and cleaning work on the
equipment to avoid injury
from cuts
Help symbols with informa-
tion on improving equipment
handling

Symbols on the implement

Caution!
Read the user manual.
Caution! Protect from rain
and damp.
Wear safety gloves.
Wear safety shoes.
Wear safety goggles.
Danger of injury from ob-
jects spinning off! Keep
surrounding persons away
form the hazard area.
Caution! Switch off the
equipment and disconnect
it from the mains before car-
rying out any cleaning or
maintenance work.
Danger from damaged
mains cable! Keep mains
cables away from tines.
GB IE
21