Table of Contents
Advertisement
KR-ASO7O/KR-A4O7D (En)
TUNED
indicator
Broadcast band
indicators
TAPE 2 indicator
Tuning mode indicator
VIDEO 1/2 indicators
Reception mode indicator
Display
MEMORY indicator
[ rwer | mene | oo |
Se
RES
Ee
———
=="
© POWER key
@TAPE 2 {MONITOR} key
@ STANDBY indicator
Press if you want to monitor tne sound which has just been re-
© Numeric keys
corded when you make recording.
@P.CALL key
@ Input selector keys (except TAPE 2(MONITOR))
Press to recall a preset station.
Select the input sources,
@BAND key
@ AUTO key
Press to switch the broadcast band.
Press to select the auto tuning mode.
OTUNING control knob
@ DIRECT key
Selects the stations to be received.
Press for direct station tuning based on numerical input.
-
@VOLUME CONTROL knob
@ MEMORY key
© PHONES jack
Press to preset a station in the memory.
Used for headphone listening.
® Tone control knobs
© SPEAKERS A/B switches
@ BALANCE control knob
Press to select the A and/or B speaker systems.
Turn to adjust the volume balance between left and right.
When the power cord of this system is plugged into an AC outlet, the STANDBY indicator lights up regardless of the ON/OFF setting of the POWER
switch. This indicates that a small amount of current is being supplied to the unit to back up the memory contents. This mode is referred to as the
Standby mode. While the STANDBY indicator is lit, the power of the system can be switched ON/OFF from the remote control unit.
Advertisement
Table of Contents
