Using this unit's internal amplifier
To use this unit's internal amplifier, set "ZONE2 AMP" to ON in SET MENU (see page 61).
Remote controlling Zone 2
The supplied remote control can be used to control Zone
2. You can even select the input source and control
components located in the main room directly from the
second room regardless of the listening condition in the
main room.
To enable Zone 2 mode on the remote
control
You will be able to switch the remote control mode from
one room to another, and use STANDBY, SYSTEM
POWER, MUTE and VOL –/+ to control the selected
room.
1
Repeat steps 1 and 2 of the procedure in
"Setting manufacturer codes" on page 63.
2
Press j / i to select "L:AMP".
+
TV VOL
CH
CH
TV MUTE
–
+
SELECT
PRESET
PRESET
TV VOL
–
3
Press u / d to select "ZONE".
+
TV VOL
CH
CH
TV MUTE
+
–
SELECT
PRESET
PRESET
TV VOL
–
ZONE 2 (U.S.A., CANADA AND AUSTRALIA MODELS ONLY)
–
+
L
R
PRESENCE
/ZONE 2
Second room
This unit
4
Press LEARN to complete the Zone setup.
The remote control will be able to operate this unit
and Zone 2.
To control Zone 2
1
Press SELECT k repeatedly to display
"ZONE2" in the display window.
2
Press SYSTEM POWER to turn Zone 2 power
on.
LEARN
SELECT
71