Sound Menu - Yamaha RX-V750 Owner's Manual

Yamaha rx-v750: owners manual
Hide thumbs Also See for RX-V750:
Table of Contents

Advertisement

SET MENU

1 SOUND MENU

Use to manually adjust any speaker setting or compensate
for video signal processing delays when using LCD
monitors or projectors. Most of the SOUND MENU
parameters are set automatically when you run auto setup
(see page 26).
1 SOUND MENU 1/2
. A)SPEAKER SET
B)SPEAKER LEVEL
C)SP DISTANCE
D)CENTER GEQ
[ ]/[ ]:Up/Down
[SELECT]:Enter
Speaker set
A)SPEAKER SET
Use to manually adjust any speaker setting.
y
If you are not satisfied with the bass sounds from your speakers,
you can change these settings according to your preference.
Center speaker CENTER SP
Choices: NONE, SML, LRG
CENTER SP
NONE )SML
• Select NONE if you do not have a center speaker. The
unit directs all of the center channel signal to the front
left and right speakers.
• Select SML if you have a small center speaker. The
unit directs the low-frequency signals of the center
channel to the speakers selected with "LFE/BASS
OUT".
• Select LRG if you have a large center speaker. The unit
directs the entire range of the center channel signal to
the center speaker.
54
LRG
Front speakers FRONT SP
Choices: SMALL, LARGE
FRONT SP
SMALL
• Select SMALL if you have small front speakers. The
unit directs the low-frequency signals of the front
channel to the speakers selected with "LFE/BASS
OUT".
• Select LARGE if you have large front speakers. The
unit directs the entire range of the front left and right
channel signals to the front left and right speakers.
Surround left/right speakers SURR L/R SP
Choices: NONE, SML, LRG
SURR L/R SP
NONE )SML
• Select NONE if you do not have surround speakers.
This will set the unit to the Virtual CINEMA DSP
mode (see page 37) and automatically set the surround
back speaker setting (SURR B L/R SP) to NONE.
• Select SML if you have small surround left and right
speakers. The low-frequency signals of the surround
channel are directed to the speakers selected with
"LFE/BASS OUT".
• Select LRG if you have large surround left and right
speakers. The entire range of the surround channel
signal is directed to the surround left and right
speakers.
)LARGE
LRG

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dsp-ax750seDsp-ax750se

Table of Contents