Advertisement
TEC HN IC A L IN F ORM AT IO N
Water pressure
Recommended
Maximum
Hot water temp.
Recommended
Maximum
Max. flow rate
Hole size in mounting surface
Max. depth of mounting surface
* Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
INSTALL ATI ON CO N SID E RATI ON S
⁄ For best results, Hansgrohe recommends that this unit
be installed by a licensed, professional plumber.
⁄ Please read over these instructions thoroughly
before beginning installation. Make sure that you
have all tools and supplies needed to complete the
installation.
⁄ Inspect the faucet for shipping damage before instal-
lation. Hansgrohe will not honor claims for shipping
damage after the faucet is installed.
⁄ This faucet does not include a drain or a pull rod.
⁄ The check valves should be inspected yearly, and
replaced if dirty or worn (see page 17).
2
15 - 75 PSI (0.1 - 0.5 MPa)
145 PSI (1 MPa)
120°-140° F (48° - 60° C)*
158°F (70° C)*
1.2 GPM (4.5 L/min)
1⅜" (34 mm)
1½" (38 mm)
E N G L I S H
⁄ The included adapters must be used. They adapt the
G ⅜ supply hoses to ⅜" stops.
⁄ The adapters include sediment filters. If the flow from
the faucet diminishes over time, clean the filters (see
page 17).
D o n ot p e r m a n en tl y remove t he f il te rs a s
de br is from t he wa te r l i n e wi l l da m a g e
t he fauc et c a r tr i d g e .
⁄ Keep this booklet and the receipt (or other proof of
date and place of purchase) for this product in a
safe place. The receipt is required should it be neces-
sary to request warranty parts.
Advertisement
