Table of Contents
Advertisement
Quick Links
Printed Matter No. 9836 9796 04
2011-07-01
WP 05-1
WP 05-3
WP 05-4
WP 05-5
WP 05-6
Read all safety warnings and instructions
Failure to follow the safety warnings and in-
structions may result in electric shock, fire and/
or serious injury.
Save all warnings and instructions for future
reference
8202 0778 00
8202 0778 01
8202 0778 02
8202 0778 03
8202 0778 04
WARNING
WP05
Product Instructions
Balancer
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Atlas Copco WP 05
Summary of Contents for Atlas Copco WP 05
- Page 1 WP05 Printed Matter No. 9836 9796 04 Balancer 2011-07-01 Product Instructions WP 05-1 8202 0778 00 WP 05-3 8202 0778 01 WP 05-4 8202 0778 02 WP 05-5 8202 0778 03 WP 05-6 8202 0778 04 WARNING Read all safety warnings and instructions...
- Page 2 Table of Contents EN Product Instructions................3 © Atlas Copco Industrial Technique AB - 9836 979604 04...
- Page 3 • “Safety Code for Portable Air Tools” (ANSI B186.1), available at the time of printing from Global Engineering Documents at http://global.ihs.com/ or call 1 800 854 7179. In case of difficulty in obtaining ANSI standards, contact ANSI via http://www.ansi.org/ © Atlas Copco Industrial Technique AB - 9836 979604 04...
-
Page 4: General Information
• This product and its accessories must not be modified. General information General • The balancer is used for relieving the weight of hand-held tools. • The balancer makes using a hand-operated tools much easier. © Atlas Copco Industrial Technique AB - 9836 979604 04... -
Page 5: Ec Declaration Of Conformity
• The load range differs depending on model, as per the nameplate. EC DECLARATION OF CONFORMITY We, Atlas Copco Industrial Technique AB, S-105 23 STOCKHOLM, SWE- DEN declare that the product (with name, type and serial number, see front page) is in conformity with the following Directive(s):... - Page 6 After changing the load or the cable suspend the working load and unlock the cable drum by pressing in the fixing pin again and then turning it to the right or left to disengage, until it springs back to the original position. © Atlas Copco Industrial Technique AB - 9836 979604 04...
-
Page 7: Maintenance
Suspend the working load and set the cable drum in motion by pulling the cable out slightly and pulling the steel pin out of the locking device. An incorrectly anchored cable can break out of the coupling under load and cause consequential damage. © Atlas Copco Industrial Technique AB - 9836 979604 04... - Page 8 Remove the spring locking device retaining ring in the cable drum with special pliers. Take the cable drum out of the housing. Unwind the cable and lift it out of the cable drum. Remove the suspension from the housing. Unwind the cable, © Atlas Copco Industrial Technique AB - 9836 979604 04...
-
Page 9: Useful Information
• Take frequent breaks and change work positions frequently. • Adapt the workstation area to your needs and the work task. © Atlas Copco Industrial Technique AB - 9836 979604 04... -
Page 10: Country Of Origin
Parts without ordering number are not delivered separately for technical rea- sons. The use of other than genuine Atlas Copco replacement parts may result in de- creased tool performance and increased maintenance and may, at the company option, invalidate all warranties. -
Page 11: Warranty
WP05 Safety and operating instructions Warranty Contact the Atlas Copco sales representative within your area to claim a prod- uct. Warranty will only be approved if the product has been installed, operated and overhauled according to the Operating Instructions. Please also see the delivery conditions applied by the local Atlas Copco com- pany. - Page 12 1.6 m 1.40 kg 8202 0778 02 2.6-3.8 kg 1.6 m 1.50 kg 8202 0778 03 3.8-5.2 kg 1.6 m 1.50 kg 8202 0778 04 5.2-6.5 kg 1.6 m 1.50 kg © Atlas Copco Industrial Technique AB - 9836 979604 04...
- Page 16 Original Product Information Atlas Copco Industrial © Copyright 2012, Atlas Copco Industrial Technique AB. All rights reserved. Any unauthorized use or copying of the contents or part thereof is prohibited. This Technique AB applies in particular to trademarks, model denominations, part numbers and SE-10523 STOCKHOLM drawings.
Need help?
Do you have a question about the WP 05 and is the answer not in the manual?
Questions and answers