Advertisement
Leg Installation
Place tabletop with bottom facing up on a soft surface to avoid scratching table.
a) Standing–Height Angled Sleigh Legs with Support Braces
Align leg and brace pilot holes on surface to identify location of self-tapping screws
for bottom of leg. Secure with provided hardware.
Note: Since each table is handcrafted uniquely, measurements may vary when aligning
legs at center. Each leg should sit 6-12in. from head of table.
1
Wood Screws
CAUTION
Heavy object.
Multi-person
lift required.
Self-Tapping Screws
Advertisement
