Advertisement
INSTALLATION
AND
OPERATING
INSTRUCTIONS
PANEL
MOUNTING
ё
1%
Unpack the meter and perform a visual inspection to
assure that no damage has occurred during shipment
or handling.
ASSEMBLY
PANEL MTG
CLAMP
CIRCUIT
BOARD
CLAMP
PANEL MTG
SCREW
RON
T ASSEMBLY
Figure 2.
Meter Mounting Drawing
N
Remove front assembly.
Rotate the four mounting Screws [3
(located in the four inner corners) 3 ог 4 times counter
clockwise to position the mounting cams correctly.
Mount
the main assembly (see Figure 2) on a panel 1/16 to 1/8
x
inch thick.
The panel shall be prepared in accordance with
the panel cut out dimensions as shown in Figure 3.
Rotate
the four mounting screws clockwise to position the mounting
cams in the lock, position and secure the instrument to the
panel.
1
"3
Advertisement
