Advertisement
PS-X50
1. CARTRIDGE WIRE CONNECTION
Install the cartridge into the shell with the mount-
j
ing screws so that the distance between the shell end
and the stylus tip is 49mm (15/6 inches).
Fasten the screws lightly so
i
that the cartridge can slide
for adjustment
(1/69
left channel (ground)
left channel (signal)
right channel (ground)
right channel (signal)
SECTION 3
ADJUSTMENTS
3-1,
MECHANICAL
ADJUSTMENT
Stylus Height Adjustment
1, Bring the tonearm above the record.
2. Lift the cueing lever up and make sure that the
clearance
between
the stylus tip and the record
is 5—9 mm (3/16 —°/s inches).
. If necessary,
loosen
the
lifter plate adjustment
screw and adjust the lifter height.
lifter plate adjustment screw
—12—
Advertisement
