Table of Contents
Advertisement
SERF
535
Manual Starting
MODEL
MFR'S. NO. 776
Mower Included
DESIGNATION
SERF
535
Electric Starting with 110 Volt Trickle Charger
MFR'S. NO. 777
Mower Included
MAKE:
MODEL NO:
CYLINDERS:1
BRIGGS &
130902 (Manual Start)
BORE: 2-9/16 Inches
STRATTON
130905 (Electric Start)
STROKE: 2-7/16 Inches
HORSEPOWER: 5
DISPLACEMENT: 12.57 Cu. In.
CYCLES: 4
CRANKSHAFT: Vertical
MANUAL
Easy-Spin Positive Rewind
STARTER
Self-Lubricated Starter Clutch
ELECTRIC
TYPE: Bendix Starter, Key Ignition Switch
STARTER
12 Volt -18 Amp. Hr. Battery with 100 M.A. Trickle Charger
IGNITION
TYPE: High Tension Magneto, Patented Design
Dust-Proof Breaker Enclosure
ENGINE
GOVERNOR
TYPE: Adjustable, Mechanical, Running in Oil
RANGE: 2200 to 4000 R.P.M.
AIR CLEANER
Sealed Joint between Housing and Oiled Foam Element
ELEMENT: Reusable Polyurethane Foam
CRANKCASE
BREATHER: Ventilated through Carburetor
LUBRICATION: Gear Impeller System
OIL CAPACITY: 1-3/4 Pints
EXHAUST VALVE
ANDSEAT
Austenitic Steel with Sintered Alloy Inserts
FUEL TANK
MATERIAL: Epoxy Resin Sealed, Terne Coated Steel
CAPACITY: 2 Quarts
MUFFLER
Quiet, Compact, Low Back Pressure
TYPE
All Spur Gear, Running in Oil Bath
MATERIAL
GEARS: Carburized and Hardened
SHAFTS: Hardened and Ground
BEARINGS: Sintered Iron
SAE 90 OIL. CAPACITY: 1 Quart
TRANSMISSION
SPEEDS
Three Forward, One Reverse
SPEED
LOW: Up to 0.9 M.P.H.
RANGE
SECOND: Up to 2.3 M.P.H.
HIGH: Up to 3.5 M.P.H.
REVERSE: Up to 3.5 M.P.H.
DIFFERENTIAL
All-Gear, Controlled Traction Type
FRAME
Inverted Channel, Electrically Welded, Heavy Gauge Steel
POWER TAKE-OFF POINTS: Front and Rear
ENGINE MOUNTING: Above Front Axle
PIVOT POINT LOCATION: At Rear Axle
CHASSIS
REAR WHEELS
PNEUMATIC INFLATION PRESSURE: 6 to 8 P.S.I.
TIRE SIZE: 16x6.50x8
12
Advertisement
Table of Contents
Troubleshooting
