Dsp Parameter; Memory Guard; Input Rename; Zone2 Max Volume - Yamaha HTR-6280 Owner's Manual

Input Rename

Changes input source names to be displayed on the front
panel display.
Selecting a name to be displayed from templates
Press jCursor k / n to select the input source name to
edit and then press jCursor l / h to select a new
name from the following templates.
– Blu-ray – Satellite
– DVD – VCR
– SetTopBox – Tape
– Game – MD
– TV – PC
– DVR – iPod
– CD – HD DVD
– CD-R – "blank"
Entering an original name
Press jCursor k / n to select the input source name to
edit and then press jENTER. Enter up to 9 characters
by selecting one character at a time with the following key
operations.
jCursor l / h
Selects a character to edit.
jCursor k / n
Selects a character to enter.
jENTER
Enters a selected character.
The following characters are available for input.
A to Z, 0 to 9, a to z, symbols (#, *, –, +, etc.) and space
Zone2
Sets the maximum volume level and initial volume level
of Zone2.
y
• These parameters are available only when "Extra Speaker Assignment"
is set to "Zone2" (page 57).
■

Zone2 Max Volume

Adjustable range: –30.0dB to +15.0dB, +16.5dB* (5.0 dB step)
Sets the maximum volume level of Zone2, so that the
volume will not be accidentally increased. For example,
you can adjust the volume between –80.0 dB and –5.0 dB
when you set this parameter to "–5.0dB".
■

Zone2 Initial Volume

Adjustable range: Off*, Mute, –80.0dB to +16.5dB (0.5 dB step)
Use this feature to set the volume level of Zone2 when the
power of Zone2 unit is turned on. When this parameter is
set to "Off", the volume level used at the time when the
Zone2 unit was set to standby is applied.
Note
• If you set "Zone2 Max Volume" and "Zone2 Initial Volume", the setting
of "Zone2 Max Volume" becomes effective. For example, if you set
"Zone2 Max Volume" to "–30.0dB" and "Zone2 Initial Volume" to
"0.0dB", the volume is automatically set to "–30.0dB" at the next time
the Zone2 unit is turned on.
Operating various settings for this unit (Setup menu)

DSP Parameter

You can set parameters for the sound field programs. For
details, see page 51.

Memory Guard

Choices: Off*, On
Protects the Setup menu settings against accidental
alteration.
Off Not protect settings.
On Protects the Setup menu settings (except for
"Decode Type" in "DSP Parameter" and
"Memory Guard").
Note
• When this parameter is switched to "On", "
corner of the Setup menu screen.
" appears at the top left
61
En