Advertisement
Controls and Operation Procedure |iiititititititititititititiniti
CLOCK Pad:
When oven is first plugged in, only the colon in the
display window will light.
To set clock
Step 1. Press the CLOCK Pad.
eek
>» The colon will start to blink.
————
Step 2. Enter time of day by pressing appropriate
TIME Pads.
>» Time appears in display window; colon is
blinking.
Example:
To set 11:25,
touch TIME Pads from left to right as follows:
Once
once twice 5 times
Step 3. Touch CLOCK Pad.
> Colon stops blinking; time of day is entered
and locked into display.
NOTES ON CLOCK:
1. To reset time of day touch CLOCK Pad twice to
clear the time. Colon will begin to blink.
Enter the correct time of day by following the above
procedures.
2. The clock will keep the time of day as long as oven
is plugged in and electricity is supplied.
3. This is a 12 hour clock.
STOP/CANCEL Pad:
Before cooking:
One tap clears your instructions.
During cooking:
One tap temporarily stops
°
the cooking process. Another tap cancels all
your instructions and time of day appears in
display window.
START Pad:
One tap allows oven to begin functioning. If door is
opened or STOP/CANCEL Pad is
tapped once during oven operation,
START Pad must again be touched to
restart oven.
TIME Pad:
The Pads serve as a 10 minute pad, 1 minute pad,
10 second pad and 1 second pad from the left, and can
be programmed up to 99 minutes and 99 seconds.
Example 1: To set 13 minutes 45 seconds
POWER Pad:
Automatically counts down from HIGH to
WARM. The following is the approximate
wattage for each power level.
Power
NN-6507
Noes
Touch;
10 MIN Pad: once
1 MIN Pad: 3 times
10 SEC Pad: 4 times
1 SEC Pad: 5 times
oO
HIGH power
700 W
600 W
MEDIUM power | 480 W
480 W
LOW power
360 W
360 W
SIMMER power
180 W
180 W
WARM power
Door Opener Button:
Opening Door:
Opening the door during cooking will stop the cooking
process without cancelling the programme. Cooking
resumes as soon as the door is closed and START
Pad is touched. The oven light will stay on or turn on
whenever the door is opened.
Beep Sound:
When a pad is touched correctly, a beep will be heard.
lf a pad is touched and no beep is heard, the unit has
not or cannot accept the instruction. The oven will beep
twice between programmed stages. At the end of any
complete programme, the oven will beep 5 times.
Kg/lb Convert Pad:
When you select some category from
Auto Weight Control, kg
indication will be prepared for. if you tap
Convert Pad, indication lights change to
Ib. oz.
NOTE:
The kg/lb Convert Pad can't work once weight
is set in kilogrammes or pounds.
Advertisement
