Advertisement
Quick Links
1 x Galaxy Tab Active2/3/5 SmartSled Case
1 x Hand Strap
6 x Screws + 1 extra (if case only)
1 x KDC480/485 SmartSled and Type-C USB Cable
(if KDC480/485 is attached)
HF RFID Companion
0.5W UHF RFID Companion
1.0W UHF RFID Companion
2000mAh Extended Battery Companion
Pistol Grip Companion (Battery optional)
5-Slot Battery Charger
KDC480 1-Slot Charging Cradle
KDC480 4-Slot Charging Cradle
KDC Pistol Grip 1-Slot Charging Cradle
KDC Pistol Grip 5-Slot Charging Cradle
Samsung Galaxy Tab Active
SmartSled
Case Assembly Manual
®
* PH0 screwdriver may be needed for assembly/disassembly.
* All pictures shown are for illustration purpose only.
* Compatible with Tab Active5, Tab Active3, and Tab Active2.
* Compatible with KDC470/475/480/485.
®
Advertisement
Related Manuals for KoamTac SmartSled KDC480
Summary of Contents for KoamTac SmartSled KDC480
- Page 1 HF RFID Companion 1 x Galaxy Tab Active2/3/5 SmartSled Case 0.5W UHF RFID Companion 1 x Hand Strap 1.0W UHF RFID Companion Samsung Galaxy Tab Active ® 6 x Screws + 1 extra (if case only) 2000mAh Extended Battery Companion 1 x KDC480/485 SmartSled and Type-C USB Cable SmartSled Case Assembly Manual...
- Page 2 2. Push both of the hand strap’s elastic loops through the 3. With the home buttons to the right, fit the Galaxy Tab holes on the back left or back right side of the case. (C) Active tablet bottom into the case, as shown. (E) Then, If your Galaxy Tab Active Smartsled Case came preassembled Adjust the length of the hand strap by repositioning the snap the top corners into place.
Need help?
Do you have a question about the SmartSled KDC480 and is the answer not in the manual?
Questions and answers