Download Print this page

KoamTac Samsung Galaxy Tab Active3 SmartSled Assembly Manual

1 x Galaxy Tab Active3 SmartSled Case

1 x Hand Strap

6 x Screws + 1 extra (if case only)

1 x KDC480/485 and Type-C USB Cable

(if KDC480/485 is attached)

0.5W UHF RFID Companion

1.0W UHF RFID Companion

Pistol Grip Companion (Battery optional)

5-Slot Battery Charger

KDC480 1-Slot Charging Cradle

KDC480 4-Slot Charging Cradle

KDC Pistol Grip 1-Slot Charging Cradle

KDC Pistol Grip 5-Slot Charging Cradle

Samsung Galaxy Tab Active3

SmartSled

Assembly Manual

* PH0 screwdriver may be needed for assembly/disassembly.

* All pictures shown are for illustration purpose only.

* Compatible with Tab Active3 and Tab Active2.

Table of Contents

Need help?

Do you have a question about the Samsung Galaxy Tab Active3 SmartSled and is the answer not in the manual?

Page 1 HF RFID Companion 1 x Galaxy Tab Active3 SmartSled Case 0.5W UHF RFID Companion 1 x Hand Strap 1.0W UHF RFID Companion Samsung Galaxy Tab Active3 ® 6 x Screws + 1 extra (if case only) 2000mAh Extended Battery Companion 1 x KDC480/485 and Type-C USB Cable SmartSled Assembly Manual...
Page 2 2. Push both of the hand strap’s elastic loops through the 3. With the home buttons to the right, fit the Galaxy Tab holes on the back left or back right side of the case. (C) Active3 bottom into the case, as shown. (E) Then, snap If your Galaxy Tab Active3 Case came preassembled with Adjust the length of the hand strap by repositioning the the top corners into place.