AVLink PJM80 User Manual

Thank you for choosing av:link PJM80 ceiling projector bracket. This bracket allow device up to 8kg in weight to be mounted on ceiling safely. Designed
to be easily installed and supplied with all required installation hardware.
Caution:
Please read this manual thoroughly to avoid damage to property or personnel. If unsure in any part of this manual please refer to professional installer
for help:
- This product contains small components that could be choking hazard if swallowed, please keep away of reach from Children.
- This product is designed for mounting on concrete or plastered ceiling. Always ensure the mounting surface will be capable to withstand the
combined weight of the bracket and device, reinforcement may require for aged or weak ceiling.
- Safety gear such as glove and safety goggles must be worn during the installation. Minimum of two people are required throughout the
installation, failure to do so may result in injury or damaged property.
- This product is design for indoor use only, joint parts must be inspected at minimum of every two month for loose joint or aged parts.
Contents:
Please check all contents list below are included inside the box and return to retailer or dealer if components missing.
For this installation you will also require pencil, tape measurer, electric drill, stud finder and Philip (cross) screwdriver.
Step 1 – Fixing Ceiling bracket
For concrete ceiling installation first of all work out the position of the installation. While holding the ceiling bracket against the ceiling use pencil to
mark where the mounting holes will be and use an electric drill to drill a hole that is around 7/16" (10.5mm) wide and 2" (50mm) deep. Insert the wall
mounting plug into the hole and install the ceiling bracket as following.
PJM80
Ceiling Projector Bracket
Item ref: 129.580UK
User Manual
129.580UK User Manual