Cable Management; Installation - Furrion Aurora FDUP50Y1A Quick Start Manual

Cable management

–
After all connections are completed, lead all connecting cables downwards through the
duct at the bottom of the media bay.
–
Leave a drip loop when cables enter the compartment. This will prevent water from
dripping down the cord and possibly entering the media bay area.
–
Close the media bay and tighten the thumb screws to avoid moisture from entering the
media bay and coming into contact with the connection points.

INSTALLATION

● The TV should be installed in an area where no direct sunlight hits the LCD screen. Ideally,
in a shaded area, under a patio or a near a structure that protects it from direct sunlight.
Before mounting your TV, consider the time of the day you would watch the TV the most
and then observe the movement of the sun at different times of the day to find an optimal
location without direct sunlight. Keep in mind that the position of the Sun may differ at
different times of the year. If you intend to mount the TV in an area with direct sunlight,
consider adding a sunshade / awning / gazebo to ensure the TV is protected from
prolonged exposure.
Rev: 01-07-24
Drip Loop
- 3 -
Thumb Screws x 3
Media Bay
Cables
CCD-0007279