Introduction Introduction Introduction Introduction Thank you very much for purchasing your LED TV. It serves as a normal colour TV and a PC monitor. To enjoy your set fully from the very beginning, read this manual carefully and keep it handy for future reference. INSTALLATION INSTALLATION INSTALLATION...
Warning CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO AVOID THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL . This symbol is intended to alert the user to avoid the risk of electric shock.
Caution Caution Never stand on, lean on or suddenly push the product or its stand. You should pay special attention to children. Caution Do not place the main unit on an unstable cart stand, shelf or table. Serious injury to an individual and damage to the television may result if it should fall.
Main unit description Control Panel Button Function VOL+ : Volume up. VOL- : Volume down. CH+ : TV channel up. CH- : TV channel down. MENU : Press to select the main menu. SOURCE : Select the input signal. POWER : Switch on when at standby mode or enter the standby mode. TV Terminal Connections 1.
Remote control POWER: Power on/off button, press once to turn the TV on and press again to turn the TV off. MUTE: Press this button to mute or restore sound. MTS/AUDIO: When stereo program is received, press this ey to switch sound system between mono and stereo.
Installation Guide Press MENU button to display the MAIN OSD MENU MENU you want; Press ENTER button to enter th the value in the sub menu; You can press MENU button to go back to the upper menu or EXIT button to close the OSD. PICTURE You can select the type of picture, which best corresponds to your viewing.
Page 10
b. Press “ / ” button to select “Noise Reduction” and press the “ / ” button to select. c. Press “ / ” button to select “Dynamic Contrast” and press the “ / ” button to select “On” or “Off”. SOUND You can select the type of sound, which best corresponds to your...
Page 11
TIME Press the “MENU” button to enter the OSD menu .Then press “e/f” button to select the “TIME” menu. 1. Press “d” button to select “Sleep Timer” and press the “e/f” button to enter sleep timer adjustment menu to adjust sleep timer. 2.
Page 12
SETUP Press the “MENU” button to enter the OSD menu .Then press “ / ” button to select the “Setup” menu. 1. Press “ ” button to select “Menu language” and press the “ / ” button to select the Menu language which you desire.
Page 13
(a). Press “c/d” button to select “Mode” the “e/f” button to adjust. (b). Press “c/d” button to select “Font Style” the “e/f” button to adjust. (c). Press “c/d” button to select “Font Size” the “e/f” button to adjust. (d). Press “c/d” button to select “Font Edge Style” the “e/f” button to adjust. (e).
Page 14
a. Press “ / ” button to select “Audio Only” the “ / ” button to select “On” or “Off”. b. Press “ / ” button to select “Blue Screen” the “ / ” button to select “On” or “Off”. 7.
Page 15
c. Press “ / ” button to select “Time Zone” and press the “ / ” button to select time zone. d. Press “ / ” button to select “Daylight Saving Time” and press the “ / ” button to select “On”...
Page 16
9. Press “ / ” button to select “CEC” and press the “ENTER” button to enter sub-menu. CEC Control Press button to select CEC Control, then press / button to select ON to show the following 6 options. Device Auto Power Off When connect to DVD players which support CEC function via HDMI cable, DVD player will turn off automatically while turn off TV.
Page 17
LOCK Press the “MENU” button to enter the OSD menu .Then press “ / ” button to select the “Lock” menu. 1. Press “ ” button to select “Enter Password” and press select digital button to enter. Note: The default password is “0000” “ENTER/ ”...
Page 18
Press “ / ” button to select “TV” and press the “ / ” button to select “Bloc ” or “UnBloc ”. Press “ / ” button to select “AV” and press the “ / ” button to select “Bloc ” or “UnBloc ”. c.
Page 19
Note: The item is available only when current stream has downloadable rating data. 8. Press “ / ” button to select “Reset RRT” and press “ENTER/ ” button to reset. Channel Press the “MENU” button to enter the OSD menu .Then press “ / ” button to select the “Channel”...
Page 20
PC Setting Press the “MENU” button to enter the OSD menu .Then press “ / ” button to select the “Setup” menu. And then press “ ” button to select “PC Setting” and press the ENTER/ “ ” button to enter sub-menu. 1.
RGB INPUT Model Resolution Horizontal Frequency(KHz) Vertical Frequency(HZ) HDMI INPUT Horizontal Frequency Vertical Frequency (KHz) (HZ) 25 67.5 50 59.94/60 COMPONENT INPUT Horizontal Frequency Vertical Frequency Model Resolution (KHz) (HZ) 480i 720 x480i 15.73 59.94/60 480p 720 x480p 31.47 59.94/60 720p 1280 x 720p 37.50 44.96...
Page 22
Before you contact our service, perform the following simple chec s. If problem still persists, disconnect the TV and contact the service. PROBLEM POSSIBLE SOLUTION - Chec whether the power cord is inserted the power outlet. No sound and picture - Chec whether you have pressed the POWER button on the front panel of TV set.
Page 23
NOTE: Problem in VGA mode (only for VGA mode). PROBLEM POSSIBLE SOLUTION The signal is out of range - Adjust resolution, horizontal frequency or vertical frequency. - Chec whether the signal cable is not loose. - Chec the input source. Vertical bar or stripe on the - Start up the automatic setting or adjust timing, phase bac ground and horizontal noise...
Page 24
After-sale Service In case any problem mostly li e a fault occurs while your using LED TV, please contact the store where you purchased this unit or the service agency.