Advertisement
5.4.3.
The detergent flow is started by pulling back the trigger.
5.4.4.
The detergent is dispensed by being displaced by water from the nozzle: the level of the detergent does not go down, but the strength
is diluted by the regulator on top of the bottle.
5.4.5.
When the detergent has been exhausted, turn off pressure washer and depress trigger to exhaust the water. empty and refill with neat
detergent as required or if finished operation simply turn to unlock dispenser and rebuild trigger assemble for storage.
5.5.
BRUSH ATTACHMENT
5.5.1.
To attach the brush to the nozzle unscrew the adjustment collar assembly as in 4.4.2 and replace with the brush attachment. locking in
by locating the lugs on the brush in the holes in the nozzle body (fig.7).
5.5.2.
When finished operation turn off pressure washer and exhaust any pressured water then the brush can be removed as per installation
and the spray-gun can be rebuilt for storage.
fig.3
Regulator
fig.6
6. BATTERY
6.1.
Charge battery fully before first use.
6.2.
Always keep the battery fully charged; recharge after each use.(Battery can be replaced by removing the four crews and plate under
the pressure washer if required).
6.3.
If the machine is not in regular use, it is recommended that the battery is charged at least every 3 months.
6.4.
To charge the battery, insert pin jack into the socket below the selector switch (fig.4) and connect the charger to a 230V mains supply.
7. MAINTENANCE
7.1.
The pump unit does not require any regular maintenance.
7.2.
The 12V connector lead is fitted with an 8A fast blow cartridge fuse in the accessory socket. If blown, replace with identical fuse.
7.3.
Should the nozzle become blocked, run the nozzle cleaning tool through gently to remove any deposits.
7.4.
When disconnected from the hose, the nozzle can be back-flushed with either water or air to dislodge any blockage.
7.5.
When not in use drain the machine, remove hoses and store in a cool yet frost-proof location beyond the reach of children.
© Jack Sealey Limited
Turn lock
fig.7
Original Language Version
Adjusting collar
Jet assembly
fig.4
PW1712.V2 Issue: 1 02/08/23
Hose gun
Trigger
Quick connector
fig.5
Advertisement
