HoMedics TOTAL COMFORT 1520272 Instruction Manual And Warranty Information page 7

Ultrasonic humidifier with uv-c technology
Table of Contents

Advertisement

Available languages

Available languages

POWER
Plug unit into a 120-volt AC electrical outlet. Press the power
button to turn unit on.
MIST OUTPUT LEVEL
Mist adjusts from the lowest output
to the highest output
. To increase the mist output, press
the mist output
button. The corresponding mist level will be lit on the display. Each press will
increase by one. Once you reach level 5, it will repeat at level 1.
WARM MIST SETTING
To change the mist temperature from cool to warm mist, press the warm mist
button.
will be
illuminated on the display. To change the mist temperature from warm to cool mist, press the warm mist
button again to turn warm mist off.
NOTE: Once warm mist is selected, it will take approximately 20-30 minutes to heat up the mist.
UV-C TECHNOLOGY
UV-C technology reduces E. coli and Staphylococcus aureus bacteria, A. niger mold, and P. citrinum
fungus in the mist. Shown by independent third-party testing.
PROGRAMMABLE DIGITAL HUMIDISTAT
The default humidistat setting is CO (continuous on). The programmable humidistat can be set in 5%
increments, from 35% to 55% humidity.
To program the humidity level, press the programmable humidistat
button. The humidity level will
increase/decrease by 5% each time the button is pressed and will be displayed on screen. Press the
humidistat
button repeatedly until the desired setting is reached. The display will show the set
humidity level.
NOTE: To eliminate any programmed humidistat setting, continue to press the programmable humidistat
button until you reach CO (continuous on), one level above 55%.
NOTE: When the set humidity level is reached, the humidifier will cycle off until the humidity in the room
drops 5% below the set humidity level. The unit will cycle on until the set humidity level is reached again.
NIGHT-LIGHT/DISPLAY LIGHT
Press the night-light/display light
button once to turn on the night-light. The light at the bottom of the
water tank will turn on, illuminating the tank. Press the night-light/display light
button a second time
to leave the night-light on, but turn off the display light. Press the night-light/display light
button a
third time to turn off both the night-light and display light. Press the night-light/display light
button a
fourth time to turn the display light back on.
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents