Calrec SIGMA Installation Manual
  1. Manuals
  2. Brands
  3. Calrec Manuals
  4. Recording Equipment
  5. SIGMA
  6. Installation manual

Calrec SIGMA Installation Manual

Digital broadcast production console with bluefin hdsp
Hide thumbs Also See for SIGMA:
Table of Contents

Advertisement

Quick Links

Download this manual
SIGMA
INSTALLATION MANUAL
Digital Broadcast Production Console with Bluefin HDSP
Putting Sound in the Picture
calrec.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SIGMA and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Calrec SIGMA

Summary of Contents for Calrec SIGMA

  • Page 1 SIGMA INSTALLATION MANUAL Digital Broadcast Production Console with Bluefin HDSP Putting Sound in the Picture calrec.com...
  • Page 2 Tel +44 (0)1422 842159 is for International usage. All trade marks acknowledged. Fax +44 (0)1422 845244 Email Enquiries@calrec.com Calrec Audio Ltd reserve the right to change © 2007 Calrec Audio Ltd. All Rights specifications without notice. E & O.E. Reserved. calrec.com...

  • Page 3: Table Of Contents

    SIGMA CONTENTS Important Information Audio Input and Output Interfaces Health and Safety AES Inputs and Outputs Technical Support Analog Inputs and Outputs BNC and XLR Interface Connector Panels Overview EDAC Interface Connector Panels System Overview AES Inputs - BNC Interface...

  • Page 4: Important Information

    April Calrec customer support engineer before carrying out any form of re- Calrec and variations to the recommended 2006 the vast majority of Calrec PCB and soldering. installation as detailed in Calrec cable assemblies will have been produced documentation.

  • Page 5: Health And Safety

    The maximum potential between the terminals exceeds 60 volts, the blanking plates are fitted to avoid the risk of electric shock. CALrEC Putting Sound in the Picture...

  • Page 6: Technical Support

    For technical assistance within the UK and Ireland, please contact the Customer Repairs Support Team at :- If you need to return goods to Calrec, for whatever reason, please contact the Customer Support Company beforehand in order that you Calrec Audio Ltd...

  • Page 7: Overview

    SIGMA OvErvIEw calrec.com Putting Sound in the Picture...

  • Page 8: System Overview

    Tel: 01422 842159 OUTPUTS OUTPUTS OUTPUTS Fax: 01422 845244 OUTPUTS enquiries@calre www.calrec.co Drawn: J. Cunning Issue date: 12/06/0 Project: Please note that Hydra Sigma with Blu inputs cannot be patched to Hydra outputs Title: Simple System Diagram 0759-51-1 SIGMA with Bluefin...

  • Page 9: Inputs And Outputs

    The largest system (in terms of I/O) would **Wide Area Bulk Cards are used to expand the I/O of have 8 WAB cards and 2 AES cards. If the system via a wide area interface such as MADI, or one WAB card is reserved as a redundant Hydra - Calrec’s sophisticated audio Hydra I/O units can interface up to 96 inputs hot spare, this system would have 896 HYDRA I/O UNIT networking system. and 96 outputs, analogue or digital. These mono I/O on WAB interfaces, plus 32 units can be local or remotely located.

  • Page 10: Equipment List

    Up to 8 line output cards, in line with the quotation 1 Bulk Power Supply and Distribution Rack Up to 3 Bulk PSU modules (dependent on console size, its distance from the digital I/O rack, and whether a hot spare is required) 10 SIGMA with Bluefin...

  • Page 11: Environmental Considerations

    Non-operating: 0% to 90% non suitable fixings during transit to prevent condensing. movement, and possible damage. Calrec Audio Ltd is not liable for any damages to Altitude the touch screen, the touch screen arm,...

  • Page 12: Input/Output Port Labelling

    These allow of the pair have separate labels and the ports to be used for different purposes & suffixes are not applied. on different shows and also, the patch 12 SIGMA with Bluefin...

  • Page 13: System Specification

    Operating Non-Operating Temperature Range 0°C to +30°C (32°F to +86°F) -20°C to +60°C (-4°F to +140°F) Relative Humidity 25% to 80% Non-condensing 0% to 90% Non-condensing Maximum Altitude 2,000 Metres (6500ft)* 15,000 Metres (49,000ft) CALrEC Putting Sound in the Picture...
  • Page 14 1 SIGMA with Bluefin...

  • Page 15: Frame Options And Dimensions

    SIGMA frAME OpTIONS ANd dIMENSIONS calrec.com Putting Sound in the Picture...

  • Page 16: Control Surface Frame Sizes

    Wild Wild Assign Assign Assign Assign Assign Assign Assign Assign Assign Assign Assign- able Fader Channel Channel Channel Channel Channel Channel Channel Channel Channel Channel Fader Fader Fader Fader Fader Fader Fader Fader Fader Fader Keyboard & Trackball in Tray 1 SIGMA with Bluefin...

  • Page 17: Control Surface Layout Examples

    Assign Assign- able Fader Channel Channel Channel Channel Channel Channel Channel Channel Channel Channel Channel Channel Channel Channel Fader Fader Fader Fader Fader Fader Fader Fader Fader Fader Fader Fader Fader Fader Keyboard and Trackball in Tray CALrEC Putting Sound in the Picture...
  • Page 18 Assign- able Fader Channel Channel Channel Channel Channel Channel Channel Channel Channel Channel Channel Channel Channel Channel Channel Channel Fader Fader Fader Fader Fader Fader Fader Fader Fader Fader Fader Fader Fader Fader Fader Fader Keyboard & Trackball in Tray 1 SIGMA with Bluefin...

  • Page 19: End Elevation

    The end elevation dimensions are the same for all frame sizes. The control surface can be separated from the stand for access to the premises. The control surface sections can also be split apart if required. CALrEC Putting Sound in the Picture...

  • Page 20: Front Elevation

    ELEvATION 4:4:4 Frame 4:4:4:4 Frame 4:4:4:4:4 Frame 20 SIGMA with Bluefin...

  • Page 21: Equipment Installation Information

    SIGMA EqUIpMENT INSTALLATION INfOrMATION calrec.com Putting Sound in the Picture...

  • Page 22: Rack Specifications

    40 % 40 % 40 % 20 % 20 % 20 % ZH5527 Calrec Audio Ltd Nutclough Mill MULTI-RAIL PSU #2 Hebden Bridge West Yorkshire HX7 8EZ Tel: 01422 842159 MULTI-RAIL PSU #1 Fax: 01422 845244 WeIghTS AnD DImenSIonS enquiries@calrec.com...

  • Page 23: Console And Rack Wiring Diagram

    CONSOLE ANd rACk wIrING dIAGrAM SIGMA RACKS AES #11 AES #9 AES #7 AES #5 AES #3 AES #1 36F SCSI 36F SCSI 36F SCSI 36F SCSI 36F SCSI 36F SCSI AES IN (x11) AES #10 AES #8 AES #6 AES #4 AES #2 36F SCSI 36F SCSI 36F SCSI 36F SCSI 36F SCSI BULK IN (338) H119 H112 H102 H100 H104 H105 (337) H120...

  • Page 24: Bulk Power Supply And Distribution

    Bulk Power Supply and 6 x 24V 600W PSU 50dBA drive the load. Each unit has a bargraph to Distribution Unit gathers and distributes indicate the output power demand. the multiple rails (from external power 2 SIGMA with Bluefin...

  • Page 25: Multi-Rail Psu

    (29dBA), drawing air from side to side through the PSU instead of in from the front, to minimise noise. Should any of the fans slow down or stop, or any voltage CALrEC Putting Sound in the Picture...

  • Page 26: Pc Information

    PC hardware settings. the user to connect to their own LAN. It is recommended that this user is used Calrec will not be responsible for the Usernames and Passwords during configuration of the PC and the configuration of this port or for any The PC will initially be set up with two sets setup of Hydra Audio Networking.

  • Page 27: File Backup

    (such as saving even if not edited). If the file needs to be e-mailed to Calrec for any reason it should always be zipped to protect the file time/date stamp. A new backup copy of this file should be made after a console upgrade.

  • Page 28: Synchronisation

    Clock as a source, the system will tolerate the first six inputs of each AES card in a variation of up to +/- 100 Hz in the the console. One of the external sources frequency of the source. The console 2 SIGMA with Bluefin...

  • Page 29: Gpio Connections

    Opto Input Specification DC - 5 to 50 volts, positive or negative Relay 7 Relay 15 AC - 5 to 50 volts peak, 50-60Hz. Relay 8 Relay 16 18 . 36 18 . 36 CALrEC Putting Sound in the Picture...

  • Page 30: Serial Interface

    The ability to change the Hub ID number is useful for the situation where two routers are connected to the console, sending the same information. If one router or serial port fails the serial function can be moved 30 SIGMA with Bluefin...
  • Page 31 & dp SETUp (fOr CALrEC rEMOTE INTErfACE) The following instructions are to set <enter> “GPI pin 23 trigger” is displayed <down arrow> “GPI pin 24” is displayed <enter> up a Dolby DP570 or DP564. Please <down arrow> until you see “Edge”...
  • Page 32 & dp CAbLING SCHEdULE 32 SIGMA with Bluefin...

  • Page 33: Madi

    AC (100-240V) ST - Multi-mode BNC (75Ohm) receive over a coaxial OR optical medium. JM5450 DC (24V) SC - Multi-mode BNC (75Ohm) A switch allows receiver selection. JM5451 AC (100-240V) SC - Multi-mode BNC (75Ohm) CALrEC Putting Sound in the Picture...
  • Page 34 3 SIGMA with Bluefin...

  • Page 35: Hydra Audio Networking

    SIGMA HydrA AUdIO NETwOrkING calrec.com Putting Sound in the Picture...

  • Page 36: Hydra Technology

    As this is a copper interface, when Drawn: J Cunnin Issue date: 07/09 using fiber cabling, it is necessary for media converters to be used between Project: Hydra the Gigabit switch and the modular Hydra I/O boxes. Title: 3 SIGMA Hydra Netwo with Bluefin Interface Har 3051-30-...
  • Page 37 & Equipment The above diagram shows 4 control to the console Gigabit interface with the 3051-31- rooms, each with a Calrec digital lowest IP address on the network. console. The gigabit interface unit for each console transmits and receives Private Network...

  • Page 38: Console Hardware

    Calrec will supply each device in your port on the rear of the unit. The second system (including the console) with its Alpha and Sigma systems can have up Gigabit port on the unit is not used. The own unique IP address, which the system to 8 WAB interfaces;...

  • Page 39: Gigabit Switch

    Mode devices are connected to it, and routes data to the correct destination port. It is It is for this reason that Calrec do not restrictions, the redundant PSU must capable of continuously receiving data at warrant our products for any Hydra...
  • Page 40 FAN FAIL indication is provided on the front 50/60Hz 100-240V AC ~ of the unit. PSU failures are reported to the JB5607 0.38-0.20A RMS 32 AES in & 32 AES out - BNC 50/60Hz operator by the console software. 0 SIGMA with Bluefin...
  • Page 41 Port 2 active (green) RS232 port is provided, such that system networks together. Status (x8 red) diagnostics can be performed by a Calrec approved engineer. Connection to the If a Hydra I/O box needs to be swapped In addition, each input connector has...

  • Page 42: Modular Hydra I/O Box

    All 14 slots may be used by any of the I/O box could be changed according to Calrec digital consoles. modules in any combination. However, it the requirements of its use. To aid this...
  • Page 43 The AC line cord is the mains disconnect Extensions of the rack sides slot into for each module. The AC line cords should If in doubt, please consult Calrec’s these rear supports, allowing the rack to have an IEC320 connector to plug into customer support team.

  • Page 44: Hydra I/O Boxes

    Redundant Hardware redundant hardware. This will happen been missed, the network connection to Alpha and Sigma systems can have up quickly but there will be a brief audio that port is assumed to have failed. A to 8 Gigabit interface units; Omega and interruption, typically 3-4 seconds.
  • Page 45 DISTAnCe BUDgeT cabling in internal environments such as in SX - MC1001TSC RJ45/SC Duplex 275m or 550m 7.5dB underfloor trunking. SX - CNFC-100GTS RJ45/SC Duplex 275m or 550m 7.5dB LX - CNFC-100GTL RJ45/SC Duplex CALrEC Putting Sound in the Picture...
  • Page 46 Connectors immediate use. Cautions There are multiple ways to clean fiber- • Do not remove transceiver covers optic cables and connectors. Included when operating. below are some helpful tips to properly  SIGMA with Bluefin...
  • Page 47 To ensure the purity of the isopropyl alcohol, do not insert the lens tissue, For further information or advice please swabs, etc into the liquid, instead, drip contact Calrec. the liquid on to the material. Cleaning Optical Transceivers The best way to clean a transceiver port is to remove particles using a stream of clean dry air.
  • Page 48  SIGMA with Bluefin...

  • Page 49: Interfaces

    SIGMA AUdIO INpUT ANd OUTpUT INTErfACES calrec.com Putting Sound in the Picture...

  • Page 50: Aes Inputs And Outputs

    If a slot is occupied by a bulk I/O card, then the AES I/O connectors belonging AES, BULK OR WAB H119 H120 to that slot are left unused, and the SMB connectors for bulk I/O are used to connect to the analog I/O racks. 0 SIGMA with Bluefin...

  • Page 51: Analog Inputs And Outputs

    1-8. Each slot has 2 dedicated input connectors on the rear of the rack, to which the system’s analog inputs are connected. Each of the input connectors provides connections for 4 stereo inputs. CALrEC Putting Sound in the Picture...

  • Page 52: Bnc And Xlr Interface Connector Panels

    PAnel (ReAR) SCSI - 36F OUTPUTS SN5036 SN818-149 BnC InPUT PAnel (FRonT) INPUTS SN5031-2 BnC InPUT PAnel (ReAR) INPUTS 17-32 INPUTS 1-16 SCSI - 36F SCSI - 36F SN5031-2 BnC oUTPUT PAnel (FRonT) OUTPUTS SN5032-2 BnC oUTPUT PAnel (ReAR) OUTPUTS 17-32 OUTPUTS 1-16 SCSI - 36F SCSI - 36F SN5032-2 2 SIGMA with Bluefin...

  • Page 53: Edac Interface Connector Panels

    Varicon 56 Way Free Socket 400-008 516-056-000-401 Varicon 56 Way Metal Hood 400-038 516-230-556 Solder Type Varicon Pins 400-025 516-290-500 Varicon Pin Extraction Tool 516-280-200 Crimp Type Varicon Pins 400-024 516-290-590 (XLR) Neutrik NC-3-FC 410-007 CALrEC Putting Sound in the Picture...

  • Page 54: Aes Inputs - Bnc Interface

    15 . 33 15 . 33 16 . 34 16 . 34 17 . 35 17 . 35 18 . 36 Chassis 18 . 36 Chassis BNC INPUT I/F PANEL (REAR) INPUTS 17-32 INPUTS 1-16 SCSI - 36F SCSI - 36F SN5031-2  SIGMA with Bluefin...

  • Page 55: Aes Outputs - Bnc Interface

    15 . 33 15 . 33 16 . 34 16 . 34 17 . 35 17 . 35 18 . 36 Chassis 18 . 36 Chassis BNC OUTPUT I/F PANEL (REAR) OUTPUTS 17-32 OUTPUTS 1-16 SCSI - 36F SCSI - 36F SN5032-2 CALrEC Putting Sound in the Picture...

  • Page 56: Aes Inputs - Xlr Interface

    10 . 28 11 . 29 12 . 30 13 . 31 14 . 32 15 . 33 16 . 34 17 . 35 XLR INPUT I/F PANEL (REAR) 18 . 36 Chassis SCSI - 36F INPUTS SN5035 SN818-148-6  SIGMA with Bluefin...

  • Page 57: Aes Outputs - Xlr Interface

    10 . 28 11 . 29 12 . 30 13 . 31 14 . 32 15 . 33 16 . 34 17 . 35 18 . 36 Chassis XLR OUTPUT I/F PANEL (REAR) SCSI - 36F OUTPUTS SN5036 SN818-149 CALrEC Putting Sound in the Picture...

  • Page 58: Analog Mic/Line Inputs (Mic/Line Or Line Adc Cards)-Style 1

    8 or 12 way Ideally, the EDAC interface panels should 2 dedicated input connectors on the EDAC interface panels via Calrec custom be located within 5m (16.5ft) of the analog rear of the rack (shown within dotted cabling to achieve Style 1 (4 pairs per I/O rack.

  • Page 59: Analog Mic/Line Inputs (Mic/Line Or Line Adc Cards)-Style 2

    2 dedicated connectors are connected to 8 or 12 way input connectors on the rear of the rack EDAC interface panels via Calrec custom Ideally, the EDAC interface panels should (shown within dotted border), to which the cabling to achieve Style 2 (6 pairs per be located within 5m (16.5ft) of the analog...

  • Page 60: Analog Line Only Inputs (Line Adc Cards Only)-Style 1

    Chassis 16 . 34 Chassis Style 1 - 8 pairs per 38 way EDAC chassis connections. 17 . 35 17 . 35 18 . 36 Chassis 18 . 36 Chassis 8 WAY EDAC INTERFACE PANEL SN5080 0 SIGMA with Bluefin...

  • Page 61: Analog Line Only Inputs (Line Adc Cards Only) - Style 2

    On EDAC, the first pin is HOT (phase), the second pin is COLD 17 . 35 17 . 35 (anti-phase) and H.LL are chassis connections. 18 . 36 Chassis 18 . 36 Chassis 8 WAY EDAC INTERFACE PANEL SN5080 CALrEC Putting Sound in the Picture...

  • Page 62: Analog Line Outputs (Dac Cards Only) - Style 1

    Style 1 - 8 pairs per 38 way EDAC 17 . 35 18 . 36 Chassis On EDACs, the first pin is HOT (phase), the second pin is COLD (anti-phase) and 8 WAY EDAC INTERFACE PANEL H.LL are chassis connections. SN5080 2 SIGMA with Bluefin...

  • Page 63: Analog Line Outputs (Dac Cards Only) - Style 2

    Style 2 - 6 pairs per 38 way EDAC On EDACs, the first pin is HOT (phase), the second pin is COLD (anti- 8 WAY EDAC INTERFACE PANEL phase) and H.LL are chassis connections. SN5080 CALrEC Putting Sound in the Picture...

  • Page 64: Specification For Scsi Style Cabling

    EITHER 3M 10236-55G3VC R/A THROUGH HOLE, 6 . 24 OR 3M 10236-2200VE VERTICAL SMT, 7 . 25 8 . 26 9 . 27 10 . 28 11 . 29  18 PAIR 28 AWG CABLE 12 . 30 UL APPROVED MATERIALS  13 . 31 FULLY SCREENED 14 . 32  15 . 33 16 . 34 17 . 35 18 . 36 X Metres 36W MDR PLUG 36W SHIELDED COVER STOCK CODES 3M10136-6000EL 3M 103336-3210-00 OR EQUIVALENT OR EQUIVALENT 312-079 1M 312-078 3M 312-077 5M  SIGMA with Bluefin...

  • Page 65: Category 5E And Category 6 Cables

    One solution can be to use the hook and loop (Velcro) cable ties. When any number of cables are bundled together in long parallel lengths, the capacitive coupling of pairs in different cables in CALrEC Putting Sound in the Picture...
  • Page 66  SIGMA with Bluefin...

  • Page 67: Input/Output Port Labelling Sheets

    SIGMA INpUT ANd OUTpUT pOrT LAbELLING SHEETS calrec.com Putting Sound in the Picture...
  • Page 68 5L + 5R 6L + 6R 7L + 7R 8L + 8R 9L + 9R 10L + 10R 11L + 11R 12L + 12R 13L + 13R 14L + 14R 15L + 15R 16L + 16R  SIGMA with Bluefin...
  • Page 69 5L + 5R 6L + 6R 7L + 7R 8L + 8R 9L + 9R 10L + 10R 11L + 11R 12L + 12R 13L + 13R 14L + 14R 15L + 15R 16L + 16R CALrEC Putting Sound in the Picture...
  • Page 70 5L + 5R 6L + 6R 7L + 7R 8L + 8R 9L + 9R 10L + 10R 11L + 11R 12L + 12R 13L + 13R 14L + 14R 15L + 15R 16L + 16R 70 SIGMA with Bluefin...
  • Page 71 5L + 5R 6L + 6R 7L + 7R 8L + 8R 9L + 9R 10L + 10R 11L + 11R 12L + 12R 13L + 13R 14L + 14R 15L + 15R 16L + 16R CALrEC Putting Sound in the Picture...
  • Page 72 5L + 5R 6L + 6R 7L + 7R 8L + 8R 9L + 9R 10L + 10R 11L + 11R 12L + 12R 13L + 13R 14L + 14R 15L + 15R 16L + 16R 72 SIGMA with Bluefin...
  • Page 73 5L + 5R 6L + 6R 7L + 7R 8L + 8R 9L + 9R 10L + 10R 11L + 11R 12L + 12R 13L + 13R 14L + 14R 15L + 15R 16L + 16R CALrEC Putting Sound in the Picture...
  • Page 74 5L + 5R 6L + 6R 7L + 7R 8L + 8R 9L + 9R 10L + 10R 11L + 11R 12L + 12R 13L + 13R 14L + 14R 15L + 15R 16L + 16R 7 SIGMA with Bluefin...
  • Page 75 5L + 5R 6L + 6R 7L + 7R 8L + 8R 9L + 9R 10L + 10R 11L + 11R 12L + 12R 13L + 13R 14L + 14R 15L + 15R 16L + 16R CALrEC Putting Sound in the Picture...
  • Page 76 5L + 5R 6L + 6R 7L + 7R 8L + 8R 9L + 9R 10L + 10R 11L + 11R 12L + 12R 13L + 13R 14L + 14R 15L + 15R 16L + 16R 7 SIGMA with Bluefin...
  • Page 77 5L + 5R 6L + 6R 7L + 7R 8L + 8R 9L + 9R 10L + 10R 11L + 11R 12L + 12R 13L + 13R 14L + 14R 15L + 15R 16L + 16R CALrEC Putting Sound in the Picture...
  • Page 78 5L + 5R 6L + 6R 7L + 7R 8L + 8R 9L + 9R 10L + 10R 11L + 11R 12L + 12R 13L + 13R 14L + 14R 15L + 15R 16L + 16R 7 SIGMA with Bluefin...
  • Page 79 5L + 5R 6L + 6R 7L + 7R 8L + 8R 9L + 9R 10L + 10R 11L + 11R 12L + 12R 13L + 13R 14L + 14R 15L + 15R 16L + 16R CALrEC Putting Sound in the Picture...
  • Page 80 (or 1st of 2 mono) 6 characters (only if pair dedicated to 2 mono signals) 1L + 1R 2L + 2R 3L + 3R 4L + 4R 5L + 5R 6L + 6R 7L + 7R 8L + 8R 0 SIGMA with Bluefin...
  • Page 81 (or 1st of 2 mono) 6 characters (only if pair dedicated to 2 mono signals) 1L + 1R 2L + 2R 3L + 3R 4L + 4R 5L + 5R 6L + 6R 7L + 7R 8L + 8R CALrEC Putting Sound in the Picture...
  • Page 82 (or 1st of 2 mono) 6 characters (only if pair dedicated to 2 mono signals) 1L + 1R 2L + 2R 3L + 3R 4L + 4R 5L + 5R 6L + 6R 7L + 7R 8L + 8R 2 SIGMA with Bluefin...
  • Page 83 (or 1st of 2 mono) 6 characters (only if pair dedicated to 2 mono signals) 1L + 1R 2L + 2R 3L + 3R 4L + 4R 5L + 5R 6L + 6R 7L + 7R 8L + 8R CALrEC Putting Sound in the Picture...
  • Page 84 (or 1st of 2 mono) 6 characters (only if pair dedicated to 2 mono signals) 1L + 1R 2L + 2R 3L + 3R 4L + 4R 5L + 5R 6L + 6R 7L + 7R 8L + 8R  SIGMA with Bluefin...
  • Page 85 (or 1st of 2 mono) 6 characters (only if pair dedicated to 2 mono signals) 1L + 1R 2L + 2R 3L + 3R 4L + 4R 5L + 5R 6L + 6R 7L + 7R 8L + 8R CALrEC Putting Sound in the Picture...
  • Page 86 (or 1st of 2 mono) 6 characters (only if pair dedicated to 2 mono signals) 1L + 1R 2L + 2R 3L + 3R 4L + 4R 5L + 5R 6L + 6R 7L + 7R 8L + 8R  SIGMA with Bluefin...
  • Page 87 (or 1st of 2 mono) 6 characters (only if pair dedicated to 2 mono signals) 1L + 1R 2L + 2R 3L + 3R 4L + 4R 5L + 5R 6L + 6R 7L + 7R 8L + 8R CALrEC Putting Sound in the Picture...
  • Page 88 (or 1st of 2 mono) 6 characters (only if pair dedicated to 2 mono signals) 1L + 1R 2L + 2R 3L + 3R 4L + 4R 5L + 5R 6L + 6R 7L + 7R 8L + 8R  SIGMA with Bluefin...
  • Page 89 (or 1st of 2 mono) 6 characters (only if pair dedicated to 2 mono signals) 1L + 1R 2L + 2R 3L + 3R 4L + 4R 5L + 5R 6L + 6R 7L + 7R 8L + 8R CALrEC Putting Sound in the Picture...
  • Page 90 (or 1st of 2 mono) 6 characters (only if pair dedicated to 2 mono signals) 1L + 1R 2L + 2R 3L + 3R 4L + 4R 5L + 5R 6L + 6R 7L + 7R 8L + 8R 0 SIGMA with Bluefin...
  • Page 91 (or 1st of 2 mono) 6 characters (only if pair dedicated to 2 mono signals) 1L + 1R 2L + 2R 3L + 3R 4L + 4R 5L + 5R 6L + 6R 7L + 7R 8L + 8R CALrEC Putting Sound in the Picture...
  • Page 92 2 SIGMA 2 SIGMA with Bluefin with Bluefin...
  • Page 93 SIGMA AppENdIx A - UNIpOwEr bULk pOwEr SUppLIES ANd SEpArATE dISTrIbUTION calrec.com Putting Sound in the Picture...
  • Page 94 The grounding lug, located on the rear panel, rear mounting brackets should be used is a bonding for connection of the chassis when no support is provided under the to other system chassis assemblies.  SIGMA with Bluefin...

  • Page 95: Bulk Psu 1

    2RU front angles. The unit/s should always be mounted in a horizontal position. It is recommended that the rack is not supported by the front flanges alone. CALrEC Putting Sound in the Picture...

  • Page 96: Notes

    NOTES  SIGMA with Bluefin...
  • Page 97 CALrEC Putting Sound in the Picture...
  • Page 98 Calrec Audio Ltd reserve the right to Whilst the Company ensures that all change specifications without notice. E & details in this document are correct at the O.E. time of publication, we reserve the right to alter specifications and equipment The established policy of Calrec Audio without notice.

Table of Contents