Advertisement
5. Slip the hose clamp on to the tubing but do not tighten it. Connect
the tubing to the inlet of the spillway using the adapter. Fig. 5
6. Tighten the hose clamp using a flathead screwdriver. Fig. 6
7. Place the spillway back inside the patio pond. Fig. 7
8. Remove the front screen from the pump and connect the prefilter to
the front of the pump. Fig. 8
9. Place the pump inside the basin and connect the tubing to the
pump. Fig. 9
PLEASE CALL 1-888-755-5641 BEFORE RETURNING TO THE STORE.
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Advertisement
