Advertisement
PREPARATION
Before beginning assembly or operation of product, make sure all parts are present. Compare parts with
package contents list and diagram above. If any part is missing or damaged, do not attempt to assemble,
install or operate the product. Contact customer service for replacement parts.
Estimated Assembly Time: 15 minutes
Tools required for assembly: flathead screwdriver, hacksaw.
OPERATION INSTRUCTIONS
1. Select a level location to assemble the Patio Pond. Then place the
upper section on to the lower section. Fig. 1
2. Remove the aluminum trim, the planter basket and the spillway
from the upper section. Fig. 2
3. Fasten the two sections together with the supplied fasteners. Fig. 3
4. For maximum water flow, cut the adapter as shown using a
hacksaw. Fig. 4
PLEASE CALL 1-888-755-5641 BEFORE RETURNING TO THE STORE.
Fig. 1
Aluminum trim
Basket
spillway
Fig. 2
Fig. 3
Cut ring
Fig. 4
Advertisement
