Yamaha P2040 Operation Manual page 3

PRECAUTIONS
1. AVOID EXCESSIVE HEAT, HUMIDITY, DUST AND 5. HANDLE CABLES CAREFULLY
VIBRATION Always plug and unplug cables — including the AC cord —
Keep the unit away from locations where it is likely to be by gripping the connector, not the cord.
exposed to unusually high temperatures or humidity. Also
avoid locations which are subject to excessive dust accu: 6. CLEAN WITH A SOFT DRY CLOTH
mulation or vibration which could cause mechanical Never use solvents such as benzine or thinner to clean the
damage. unit. Wipe clean with a soft, dry cloth.
2. AVOID PHYSICAL SHOCKS 7. ALWAYS USE THE CORRECT POWER SOURCE
Strong physical shocks to the unit can cause damage.
Make sure that the power source voltage specified on the
Handle it with care.
rear panel matches your local AC mains supply. Also
make sure than the AC mains supply can deliver more
3. DO NOT OPEN THE UNIT OR ATTEMPT REPAIRS OR than enough current to handle all equipment used in your
MODIFICATIONS YOURSELF system.
This product contains no user-serviceable parts. Refer all
maintenance to qualified Yamaha service personnel.
Opening the unit and/or tampering with the internal
circuitry will void the warranty.
4. MAKE SURE POWER IS OFF BEFORE MAKING OR
REMOVING CONNECTIONS
Always turn the power OFF prior to connecting or dis-
connecting cables. This is important to prevent damage
to the unit itself as well as other connected equipment.
IMPORTANT NOTICE FOR THE UNITED KINGDOM
Connecting the Plug and Cord
IMPORTANT. The wires in this mains lead are coloured in accordance with the following code:
BLUE : NEUTRAL
BROWN : LIVE
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the
terminals in your plug proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.
Making sure that neither core is connected to the earth terminal of the three pin plug.
* This applies only to products distributed by YAMAHA - KEMBLE MUSIC (U.K.) LTD.
WARNING: CHEMICAL CONTENT NOTICE!
The solder used in the manufacture of this product contains LEAD. In addition, the electrical/electronic and/or plastic (where applicable) components may
also contain traces of chemicals found by the California Health and Welfare Agency (and possibly other entities) to cause cancer and/or birth defects or
other reproductive harm.
DO NOT REMOVE ANY ENCLOSURE COMPONENTS! There are no user serviceable parts inside. All service should be performed by a service
representative authorized by Yamaha to perform such service.
IMPORTANT MESSAGE: Yamaha strives to produce products that are both user safe and environmentally "friendly". We sincerely believe that our
products meet these goals. However, in keeping with both the spirit and the letter of various statutes we have included the messages shown above and |
others in various locations in this manual.
* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.